ICSI Flag holder

[fastfraser]

Anyone out there with the ICSI flag holder on there RTs. If so where do you mount the long flat bar that the two flag holders attach to ? I know it is to go behind the licence plate but on the top or bottom. I would think it would mount on the top so the bolts go where the licence plate attached. There is no way my not long enough bracket can attach to the holes in the rear fender where the licence plate attached .:dontknow:

 

[scooterexpress]

right behind the license plate

 

[RanHag]

Anyone out there with the ICSI flag holder on there RTs. If so where do you mount the long flat bar that the two flag holders attach to ? I know it is to go behind the licence plate but on the top or bottom. I would think it would mount on the top so the bolts go where the licence plate attached. There is no way my not long enough bracket can attach to the holes in the rear fender where the licence plate attached .:dontknow:

iT GOES BEHIND THE PLATE AT THE TOP.

 

[NorthStar]

How to mount your ISCI License Plate Flag Holder

Step 1: Remove your chrome handlebars (see shop manual for detailed instructions);

Step 2: Remove your top license plate bolts;

Step 3: Put the ISCI Flat bar behind the license plate;

Step 4: Re-insert and secure the top license plate bolts;

Step 5: Re-install your chrome handle bars.

Please disregard Steps 1 and 5 if you have already switched out your OEM handlebars in one day. :bowdown:

 

[fastfraser]

Ya that whats I thought . I must have the wrong flat bar ,because if I put the bar on where the Licence plate goes there is no way that it will mount. The two flag staffs will not clear the hump over the licence plate where the plate light is located .

Man first I get the Gorilla alarm for the Spyder and the shock alarm doesn't work, so on my dime I have to pull the alarm off the Spyder and mail it back, two weeks later and still haven't herd a darn thing and now this with the blasted flag mount .:dontknow::dontknow: I guess there will be NO flags on my Spyder for SpyderFest .

 

[fastfraser]

Anyone know if ICSI will be at SpyderFest ?

 

[NorthStar]

Ya that whats I thought . I must have the wrong flat bar ,because if I put the bar on where the Licence plate goes there is no way that it will mount. The two flag staffs will not clear the hump over the licence plate where the plate light is located .

Man first I get the Gorilla alarm for the Spyder and the shock alarm doesn't work, so on my dime I have to pull the alarm off the Spyder and mail it back, two weeks later and still haven't herd a darn thing and now this with the blasted flag mount .:dontknow::dontknow: I guess there will be NO flags on my Spyder for SpyderFest .

Dan, on my ISCI flag holder i remember that during my install I had a head scratching moment similar to yours. The flag mast is notched in such a way that you can mount it at the wrong angle. After I realized this I switched it around and it fit properly. That being said, it is possible you have the wrong unit. If you want to send me a picture of your unit I will be able to see if it is for the RT.

 

[scooterexpress]

fastfrasir heres what mines like on my rts

 

[rock]

tell me where to get this flag mount for my 2010 rts se5 or where to order it

 

[scooterexpress]

ISCI, they are a sponser here

 

[cjackg]

 

[cjackg]

View attachment 43822

fastfrasir heres what mines like on my rts

I believe the US flag should be mounted on the RH side....

 

[SpyderAnn01]

Anyone know if ICSI will be at SpyderFest ?

Yes they will be there!

 

[SpyderAnn01]

I believe the US flag should be mounted on the RH side....

I believe you are correct.

 

[fastfraser]

Dan, on my ISCI flag holder i remember that during my install I had a head scratching moment similar to yours. The flag mast is notched in such a way that you can mount it at the wrong angle. After I realized this I switched it around and it fit properly. That being said, it is possible you have the wrong unit. If you want to send me a picture of your unit I will be able to see if it is for the RT.

Thanks NorthStar. I tried every possible combo and the bottom line is that flat plate isn't long enough. I will call ISCI on Mon. with the measurement .

View attachment 43820View attachment 43821View attachment 43822

fastfrasir here's what mines like on my rts

Thanks for the pics. With the flags attatched to the flat bar it won't fit between the hump where the licence plate light is housed in .

Yes they will be there!

Thanks Ann. I will bring the kit with me to SpyderFest as well as give them a call Mon. morning .

 

[RGVSpyderGirl]

What size is flag?

I want to order the Patriot Guard Riders flag for the second flag. What size is the American flag that comes with tall flag holder for RT?

 

[Papa]

I want to order the Patriot Guard Riders flag for the second flag. What size is the American flag that comes with tall flag holder for RT?

It's the 12 x 15, Auto w/o staff.

http://patriot-guard-riders.hostedb...hing_size-bin,color_name&searchRank=salesrank

 

[shrubs]

View attachment 43820View attachment 43821View attachment 43822

fastfrasir heres what mines like on my rts

Have you runs these at highway speeds?

 

[Oldmanzues]

I have run mine on the highway up to about 75 ( Cops in front ) with no problems. They have been on there for 1500 miles or so.
Anybody flying flags. Try putting "Fray Edge" on the trailing edge. It is supposed to used as a seam sealer for sewing. Got mine at Wal mart. Many flags have gone thousands of miles. I have been in the PGR almost since it started.
Oldmanzues

 

[stevedfive]

I buy my flags from THEPROPAD.COM
I recently bought a new US flag and a Thin Blue Line flag. (not shown)