I need HELP

[duneside]

I've got all the bolts out of the gray castings on the right side (I'm gonna try hydrographics on them) but I can't seem to wiggle it off the master cylinder:banghead:. There's a little brake fluid that came out but the leak stopped:dontknow:. I'm gonna have to start drinking soon ifin I don't get some progress soon. Any help would be greatly appreciated!!

Thanks, Wayne

 

[Lamonster]

It's a fight but it will come out, I've done it three times now. :banghead:

 

[duneside]

I musta just needed to vent ,went back out ...it came right offhyea:. Now I hafta wait till 5 to:cheers:. Thanks Lamont!

 

[Jeriatric]

Don't like the 'brake fluid leak' you reported. Try to find out where the fluid came from as soon as you have all the brake system components reinstalled. It may seem to have gone away but, application of the brakes may prove otherwise. If it does leak again on application you should most likely bleed the system after repairing. jmy2c Best of luck with the remainder of your project :thumbup:

 

[Bob Denman]

The best of luck to you with this project! :2thumbs:
We're gonna have to see some pictures of the glorious results...

 

[duneside]

Thanks guys, all parts are off and ready for sanding, painting. Never done this hydrographic printing before so I can't help but wonder how many times it's gonna take to get it right:sour:. But hey ya gotta have something to do when it's slow at the shop!:shocked:

Thanks again, Wayne

 

[Bob Denman]

Nothing can be rushed enough to make a bad job look good... :shocked:
It'll be ready when you're happy with what you see! :2thumbs:

 

[bruiser]

Now I hafta wait till 5 to:cheers:.


Hey, it's 5:00 somewhere!!!! :cheers:

 

[Lamonster]

Don't like the 'brake fluid leak' you reported. Try to find out where the fluid came from as soon as you have all the brake system components reinstalled. It may seem to have gone away but, application of the brakes may prove otherwise. If it does leak again on application you should most likely bleed the system after repairing. jmy2c Best of luck with the remainder of your project :thumbup:

There's a rod and plunger that will seep a little fluid when you're fighting getting that out. He'll be fine. :doorag:

 

[Chupaca]

Great job..!!

Let us know how that painting goes although the pictures will tell....opcorn:

 

[DR Buck]

It's a fight but it will come out, I've done it three times now. :banghead:

​Taking mine off helped to jostle my memory. It helped me remember a few 4 letter words I had forgotten. :lecturef_smilie:

 

[Jeriatric]

There's a rod and plunger that will seep a little fluid when you're fighting getting that out. He'll be fine. :doorag:

You've done enough of them to know. That's for sure. :thumbup:

Overly cautious me :roflblack: