I need advice

[Ochoa1801]

I don't used too much my F3S. But I have noticed that the tank have some scratches. Anyone can post pictures, tips or where to buy tanks protection

thanks in advance

 

[Colin]

Go to Wrapmyspyder.com. these guys are awesome, great service and great products

https://wrapmyspyder.com/shop/spyder-f3/f3-tank-protectors/

 

[Chupaca]

What he said...

:agree: you can also get clear vinyl at auto parts used to protect hoods etc....:thumbup:

 

[Diamond Dave]

Tank protector

I don't used too much my F3S. But I have noticed that the tank have some scratches. Anyone can post pictures, tips or where to buy tanks protection

thanks in advance

I looked on amazon
Wanted something way off

Size is 8.5" tall x 6.9" wide, Grim Reaper Gun Gel Motorcycle Gas Tankpad Kawasaki Ninja ZX Suzuki GSXR Honda CBR Yamaha YZF Triumph Motorcycle TanK pad Decal Sticker
by Immortal Graphix
Link: https://amzn.com/B00IUUW49W

---

[TABLE="class: a-normal a-spacing-micro, width: 442"]
[TR]
[TD="class: a-text-left"]
[/TD]
[TD="class: a-text-right, align: right"][/TD]
[/TR]
[/TABLE]

 

[deer30084]

When I bought my F3, it came with two 4" X 4" (approx.) square clear plastic adhesive patches with the manual. I wondered what those were for. After riding for a few weeks, I noticed scratches or wear on the tank near the front of the seat probably from the zipper of my jacket or something. So I rubbed it with scratch remover, then applied one of the clear adhesive patches to the area. I guess that's what they were for.

 

[wengerda]

When I bought my F3, it came with two 4" X 4" (approx.) square clear plastic adhesive patches with the manual. I wondered what those were for. After riding for a few weeks, I noticed scratches or wear on the tank near the front of the seat probably from the zipper of my jacket or something. So I rubbed it with scratch remover, then applied one of the clear adhesive patches to the area. I guess that's what they were for.

I thought the two 4x4 patches were for the sides of the passenger pegs.

 

[Tazzel]

Spyder Wraps has great products but nothing yet to cover more then the top center of the tank. the F3 needs tank protection on the sides where your thighs rub. Over the last year there have been a few company’s making wraps for the F3 as well. Amr Racing, World Class Graphics, Graphic Kits Depot, etc

 

[trucker1]

check with some of the can- am dealers or other cycle shops maybe they know of a leather shop or someone that can make a tank cover that might work on the tank. I would do that before sticking tape on the tank.

 

[Tango]

Go to Wrapmyspyder.com. these guys are awesome, great service and great products

https://wrapmyspyder.com/shop/spyder-f3/f3-tank-protectors/

Have one on my F3. It works. :thumbup: Tom :spyder:

 

[Firefly]

When I bought my F3, it came with two 4" X 4" (approx.) square clear plastic adhesive patches with the manual. I wondered what those were for. After riding for a few weeks, I noticed scratches or wear on the tank near the front of the seat probably from the zipper of my jacket or something. So I rubbed it with scratch remover, then applied one of the clear adhesive patches to the area. I guess that's what they were for.

Those patches are to wrap the frame after you decide which position (2,3,4,5) you finally want. They wrap where you heel would touch the frame and protect it from rubbing the finish off.

 

[Godlover]

I had my local Sign Pro guy install carbon fiber wrap on my tank.

 

[SparkyBravo]

I have the Spyder tank protectors, I think they're made for an RS but just barely fit the F3. Unfortunately the weather was cold when I applied mine, the top pad needs to wrap around the top of the tank near the gas cap. Because I didn't heat the pad, it didn't conform to the shape very well and about 1 cm of it has lifted in the front. If I replace them I would probably try preheating them in the oven at 175'F for 10 minutes or so. Even as it is, it doesn't look bad at all.

 

[Ochoa1801]

do you know what brand is it

thanks

 

[Ochoa1801]

do you know what brand is it

thanks

 

[SparkyBravo]

BRP. They have the Spyder "Y" logo on them.

 

[Bfromla]

Tank pads

I found mine here: http://www.outridersapparel.com. Matched my theme made by Lethal threat good thick material & sticks well even to the textured plastic on my ST fyi clean surface well with alcohol & let evap dry everything will stick better. I weighed it down with a bag of dirt overnight to get even application of the sticky backside.

 

[tates]

Tank cover

I have this product on my Gold Wing and was thinking of getting some for my F3 Limited. Plan to put on the sides and over the top of the tank.
http://techspec-usa.com

Tom Westendorf