-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
HMT brake light
- Thread starter dbxray
- Start date
NancysToy
Motorbike Professor
You may have to rap it gently with the palm of your hand to pop it loose, then move it around or bend it slightly to get it off. If it is loose, it is just a matter of manipulating it. If it is not loose, you probably got the wrong screws somewhere...or missed some. It pretty much just tips back and out when properly loosened.
Last edited:
CyncySpyder
Teddys favorite human
Like Scotty said, once the bolts are removed, it should easily pop apart
![1326580872-picsay[1].jpg](https://www.spyderlovers.com/data/attachments/5/5507-400d6c1e1533e522c9488750d87967ea.jpg?hash=b9O6eg_pmi "1326580872-picsay[1].jpg")
Grandpa Spyder
New member
Did you remove the screws in the side compts. (saddle bags) The reason I ask this is because I had same problem and removed the screws from inside the rear trunk because I mis-understood the instructions. When it did not come off I looked at it again and realize my mistake. then removed the 2 screws inside ea. saddle bag.
Bob Denman
New member
Things stick together nice and tight up there... a little bit of "persuading" might be all that is needed for it to pop apart for you.
Similar threads
