HELP with Xenon Depot HID lights

[satownsendsr]

I installed the above lights in my 2014 RT Limited SE6. I saw an earlier post where you didn't have to use the harness and connect it to the battery. Then I saw one where there had been problems with the SE6 shifting due to not connecting to the battery so I elected to connect to the battery. Now I have a problem with the right light (the first one to be installed). When I crank the bike the light came on, but when I switched it to high beam the light goes out. I can hear the shield inside the light moving from high to dim but every time it goes to high beam the light goes out. Any suggestions? [emoji20]

Sent from my Galaxy Note 4 using Tapatalk

 

[BLUEKNIGHT911]

DIRECTLY TO BATTERY ????

I installed the above lights in my 2014 RT Limited SE6. I saw an earlier post where you didn't have to use the harness and connect it to the battery. Then I saw one where there had been problems with the SE6 shifting due to not connecting to the battery so I elected to connect to the battery. Now I have a problem with the right light (the first one to be installed). When I crank the bike the light came on, but when I switched it to high beam the light goes out. I can hear the shield inside the light moving from high to dim but every time it goes to high beam the light goes out. Any suggestions? [emoji20]

Sent from my Galaxy Note 4 using Tapatalk

Are you sure you did this ????....... If so,... how do you turn them on and off ????.... Maybe I'm missing something here !!!!.....Mike :thumbup:

 

[satownsendsr]

Are you sure you did this ????....... If so,... how do you turn them on and off ????.... Maybe I'm missing something here !!!!.....Mike [emoji106]

It is the headlights. They only burn when the bike is running. The crazy thing is that the light will only light with the switch in the low beam position. When I switch to high beam, the flapper moves and the light goes out.

Sent from my Galaxy Note 4 using Tapatalk

 

[satownsendsr]

It is the headlights. They only burn when the bike is running. The crazy thing is that the light will only light with the switch in the low beam position. When I switch to high beam, the flapper moves and the light goes out.

Sent from my Galaxy Note 4 using Tapatalk

I have disconnected all the wiring for the Xeon Depot HID Xtreme Halagon lights and put the original light back in the assembly. Plugged it into the wide connector and the small connector as normal. Cranked the bike, same thing happens. Low beam works but when I switch to High Beam, the flapper moves down, light goes out, but I have the "blue" high beam indicator light on the left side gage. Since the light is supposed to burn all the time, I can't get my head around why it is going out when switching the high beam which only moves the flapper up. I moved it with my finger and it moves freely and operates correctly. Haven't done anything but took the assmebly out to remove the bulb and put the harnesses on to install the new Xtreme HID bulb and this issue has come up. Seems like everytime I try to do 1 thing in this bike, I wind up having to repair 2 or 3 other things...........Frustrated in NC

I'm dead in the water here.

Sent from my SM-P900 using Tapatalk