HELP, Need some insight from the Spyder Big Brains regarding 2011 RT to RSS bar swap

[MDBrion]

Well as the title states I'm looking to swap the handlebars from a 2011 RT to a 2011 RSS (SE5) and need to determine if it is possible without major modification. I've searched the forums and found several posts regarding folks making the swap on 2013 and newer models but can't seem to find any info on making the swap on the earlier models 08-11. Any insight on previous efforts by others (wins or fails) appreciated along with any potential pitfalls :banghead: or problems with performing this modification would be appreciated. Thanks !

 

[mn.roadking]

I will be performing this swap. A 3 to 4 hole adapter plate is the biggest difference I see early to late models.

 

[MDBrion]

Research

I will be performing this swap. A 3 to 4 hole adapter plate is the biggest difference I see early to late models.

Ive looked at the illustrated parts breakdown and like you said, it looks like the 3 to 4 hole adapter is the biggest hurdle to overcome. I have a 1" riser already and would consider taking it to a local machine shop to have them utilize it as a starting pattern to fabricate an adapter from 6061-T6 aluminum. One other potential pitfall would be whether enough wiring and cable are available to extend the throttle and controls. That will remain an unknown, unless someone who has performed this mod reads this and provides additional insight... I guess it can't be much different then some of the aftermarket handlebar risers. When do you plan on attempting the mod ??

 

[r1100rider]

Well as the title states I'm looking to swap the handlebars from a 2011 RT to a 2011 RSS (SE5) and need to determine if it is possible without major modification. I've searched the forums and found several posts regarding folks making the swap on 2013 and newer models but can't seem to find any info on making the swap on the earlier models 08-11. Any insight on previous efforts by others (wins or fails) appreciated along with any potential pitfalls :banghead: or problems with performing this modification would be appreciated. Thanks !

there are several differant risers on the market wouldn't that be easier

 

[MDBrion]

Aftermarket...

there are several differant risers on the market wouldn't that be easier

Ive seen a few of those and they don't look as nice as what would be a stock design bar from a later model year... Just not into the aftermarket look !