• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

had a problem starting

moe113097

New member
I added slip on grab on grips on Saturday and bike would not start Sunday morning kept cranking strong but seemed like was not getting fuel. I then started cranking with throttle in wide open position and it sputtered to life . I went ridingwith friends and bike started several times no issue.

Anyone have this happen to them any guess to reason?
 
Here's the thing..!!

you may have flooded it while installing the grips. The trick to restart is to cranck it wide open to clear the cylinders. You did that and you should be fine. :thumbup:
 
But I put grips on Saturday made sure I only twisted clock wise and did not try to start until the following day and besides I thought throttle by wire does not affect fuel injection when engine is off. BTW I did remove grip end piece .
 
Thanks for technical response :sour: just hope it does not happen on the trip to spyderfest


:roflblack::roflblack::roflblack:, ride it a few more times and see if it happens again, if so take it to the dealer, if not it was probably just a glitch.


Cruzr Joe
 
It's throttle by wire and fuel injected. You can't flood the engine by putting on grips. :shocked:

My limited has flooded 3 times over 2 years.
 
Back
Top