-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Grille (Wire Mesh) Removal
- Thread starter Bogie
- Start date
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
THOSE GRILLS
:yikes:.....OMG....I just did this and I can tell you , if you want to do it correctly after you remove the " FRUNK " assembly ( this is the easy part ).....in order to get those " GRIILS " out you will have to dis-assemble almost all of the separate pieces of the " frunk " the get to the reverse facing bolts that hold the screens in place ..........When BRP puts the " frunk " together I believe they start with the grills being fastened then they fasten everything else afterwards. I recently decided to make my own " KOTT STYLE " grills,( which are removeable ) because I wanted to be to clean the RADIATORS of all the DRIED bugs fastened there........and the only other way is to remove the entire " frunk ".........What I ended up doing was cutting the OEM grills out / off and using them for MY DIY " KOTT STYLE " grills..........( removal; was not easy either )...............Good Luck.....Mike :thumbup:
:yikes:.....OMG....I just did this and I can tell you , if you want to do it correctly after you remove the " FRUNK " assembly ( this is the easy part ).....in order to get those " GRIILS " out you will have to dis-assemble almost all of the separate pieces of the " frunk " the get to the reverse facing bolts that hold the screens in place ..........When BRP puts the " frunk " together I believe they start with the grills being fastened then they fasten everything else afterwards. I recently decided to make my own " KOTT STYLE " grills,( which are removeable ) because I wanted to be to clean the RADIATORS of all the DRIED bugs fastened there........and the only other way is to remove the entire " frunk ".........What I ended up doing was cutting the OEM grills out / off and using them for MY DIY " KOTT STYLE " grills..........( removal; was not easy either )...............Good Luck.....Mike :thumbup:
Last edited:
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
TEMPLATE
:yikes::yikes::yikes:...........To bad you weren't at Spyderfest......I actually brought a " TEMPLATE " with me , for making the KOTT style grills. It took me quite awhile to get it perfect......I also have a metal template for the 3-D style Carbon Graphic " stick-on " that goes onto the RT windshield to hide the dirt that is hard to clean..............PS , if you send me a stamped self addressed envelope I'll make a copy of my " TEMPLATE " and send it to you. It took me about 4 hours to make it. :gaah:
:yikes::yikes::yikes:...........To bad you weren't at Spyderfest......I actually brought a " TEMPLATE " with me , for making the KOTT style grills. It took me quite awhile to get it perfect......I also have a metal template for the 3-D style Carbon Graphic " stick-on " that goes onto the RT windshield to hide the dirt that is hard to clean..............PS , if you send me a stamped self addressed envelope I'll make a copy of my " TEMPLATE " and send it to you. It took me about 4 hours to make it. :gaah:
Last edited:
Cruzr Joe
New member
Or you could just order the KOTT Grills from Spyderpops with all the installation hardware and instructions, Spyderpops grills are Stainless Steel with the rubber edges so you don't scratch your paint. Spyderpops is a contributing vendor to this forum, and KOTT Grills are his design.
Cruzr Joe
Cruzr Joe
Similar threads
