• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Gas gauge

smokster

New member
After 13,400 mile, my gas gauge will never register full.
Anyone else have these problems?
Did I miss a service bulletin?
 
I don't care. You gotta milk the gas into that tank so i don't bother trying to get it full. There's something about the tank shape that makes it hard to get it fully full.
 
I don't care. You gotta milk the gas into that tank so i don't bother trying to get it full. There's something about the tank shape that makes it hard to get it fully full.
Not sure what that means...have had mine for 13,000 miles 14 months, worked like a charm, now I am missing 2 1/2 bars even though it is completely full.
Anyone else have problems of solutions?
 
Not sure what that means...have had mine for 13,000 miles 14 months, worked like a charm, now I am missing 2 1/2 bars even though it is completely full.
Anyone else have problems of solutions?
I'd see the dealer. There was a service bulletin advising them on how to check the sending units, so I suspect they have had some problems.
-Scotty
1a_snow.gif
 
Not sure what that means...have had mine for 13,000 miles 14 months, worked like a charm, now I am missing 2 1/2 bars even though it is completely full.
Anyone else have problems of solutions?

It is hard to get that last little bar to light on the Spyder because of tank configuration.

But if you have 2 1/2 bars missing when full you definitely have an issue. Could be anything from the gauge mechanism hanging to a bad readout on the cluster.
 
Back
Top