• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Foot boards

2008 to at least 2012 are all the same; the only consideration would be if you've got an SE 5 or SM 5 transmission...
Check with John at "Seal"... his boards are widely used by members here! :thumbup:
 
Does anyone make a foot board for 2012 RSS I see one's for 2010 will these work?

Hey corona man,

Check out seal floorboard.com I stock floorboards for both the RS SM5 and the RS SE5. They fit all RS Spyders up thru the 2012. I haven't seen the 2013 yet, but will come out with then in the Spring also.

Ride in comfort,

John
Seal Floorboards
 
Hey corona man,

Check out seal floorboard.com I stock floorboards for both the RS SM5 and the RS SE5. They fit all RS Spyders up thru the 2012. I haven't seen the 2013 yet, but will come out with then in the Spring also.

Ride in comfort,

John
Seal Floorboards

Hi John,

I have a RS SE 5. I have looked at your floorboards many times. Can't afford to take the plunge YET!! I have read the installation instructions (not that I would be doing it). Will it actually change the brake configuration?
 
If you mean the BRP Board from the 2013, I would highly doubt it.

The SE5 is the only model they fit they do not fit the manual transmission. If they don't fit a 2013 manual can't see them fitting a 2010?
 
John's handywork from Seal Floorboards, on a 2012 RS.

001.jpg
 
Back
Top