Fender tip lights

[cmar157]

I want to replace the fender tip lights and replace themwith LED lights but while searching I saw someone who left the existing fixtureand just replaced the bulb. I was wondering if you can just do it that way ordo you need to replace the entire fixture? Also if you can replace just thebulb does anyone know what bulb you use?
Thanks in advance

 

[Littlebadwolf]

I just got thru installing the fender tip lights and the Front Mud flaps turning them into both running lights and signal lights. The Fender Tip Light kit from ESI comes with a choice of LEDs. Great additions to my RS as far as visability goes.

 

[MarkLawson]

I replaced my fender tip light bulbs with amber 4-LED bulbs. No change to the fixtures were needed. I found the single LED bulbs were not bright enough. Found them at a local auto parts store.

 

[Bob Denman]

:agree: They do add lots more light to the front corners... :thumbup:

 

[rcantrell52]

Fender Tip Lights

You might consider Custom Dynamics for your fender tip lights. Another option is to contact Reggie or Steve with Tric LED.
Reese

 

[SilverSurfer]

... and so in conclusion

I want to replace the fender tip lights and replace themwith LED lights but while searching I saw someone who left the existing fixtureand just replaced the bulb. I was wondering if you can just do it that way ordo you need to replace the entire fixture? Also if you can replace just thebulb does anyone know what bulb you use?
Thanks in advance

If you want to 'tric' your fender tip lights, i.e. integrate them with turn signals, etc., then go to folks like Custom Dynamics for the kit(s) to do so. They're also happy to include the accompanying lights. Or, if you just want to change your bulbs, then MarkLawson's tip is your path to success.

I used one of Custom Dynamics' solutions to integrate my fender tips with turn signals, as well as replacing the fender reflectors with LEDs, mud flap lights, HMT brake light, etc. Alas, my fender tips still have the original bulbs, and I think I'm a-gonna go to the autoparts store and get some amber LEDs.

Ride Safe

~ Surfer

 

[Grandpa Spyder]

I replaced my fender tip light bulbs with amber 4-LED bulbs. No change to the fixtures were needed. I found the single LED bulbs were not bright enough. Found them at a local auto parts store.

What is the bulb number for those amber LEDs you put in?

 

[stevedfive]

This is what I use in amber;

http://www.superbrightleds.com/cgi-...ction=DispPage&Page2Disp=/specs/WLED-xHP5.htm

 

[rogerb]

Bulb is a T-10

 

[Campverdefela]

This is what I use in amber;

http://www.superbrightleds.com/cgi-...ction=DispPage&Page2Disp=/specs/WLED-xHP5.htm

:2thumbs: These are really bright from all angles, good call.