After contacting BRP, I had the new panels installed by my dealer. I had previously installed air wings. I replaced the stock panel bolts with the ones supplied by Baker, slightly longer to reflect the additional width of the brackets. When the dealer installed the new panels they did use any bolts stating that they needed the original bolts from the 2013 panels which I did not have with me at that time. The "Baker" bolts and the original bolts are the same thread size, both the original and the Baker bolts are smaller in diameter then what the replacement panels require. I am thinking that the new panels use "1/4" fasteners? Any one else run into this issue?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Fasteners for upgraded 2013 air panels
- Thread starter Bubba ST
- Start date
Similar threads
