-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
fancan
- Thread starter modagwood
- Start date
MidLifeCrisis
New member
I love mine. I was riding in 112 degrees last week and no issues at all. Temp guage read the same pre fancan and no toasted toes :thumbup:
No issues in town or at stops either. I do feel a bit more heat on the back of my leg at speeds, when the wind swirls the heat back up, but nothing serious and only notice it in some cross winds. It was probably there before, but I was too focused on my frying foot to notice.
The installation is easy enough, but you have to remove almost all tupperwear from the right side. That part's a drag. You can see where it needs to go and you can almost get it there, but no cigar.
Sent from my ADR6400L using Tapatalk 2
No issues in town or at stops either. I do feel a bit more heat on the back of my leg at speeds, when the wind swirls the heat back up, but nothing serious and only notice it in some cross winds. It was probably there before, but I was too focused on my frying foot to notice.
The installation is easy enough, but you have to remove almost all tupperwear from the right side. That part's a drag. You can see where it needs to go and you can almost get it there, but no cigar.
Sent from my ADR6400L using Tapatalk 2
Last edited:
ISCI Billy
New member
The fan can does take more time to install on the RT. A piece of cake on the RS. It basically redirects the air from 3 o'clock to about 7:30, if you catch my drift. Let me know if we can be of help in any way as I will be happy to help in any way possible.
SpyderPawPaw
New member
Does the fancan fit on the 2012 RT and if so does the bottom cover need to be cut out?
Never mind I see the opening to the engine compart.
Thanks,
SpyderPawPaw
Last edited:
dancogan
New member
Well, Billy, if you're going to be in Michigan you could bring one along and do the install! :roflblack::roflblack::roflblack:
By the way, love my handbrake, and thank you again for going out or your way at Spyderfest 2 to replace a defective part. Great service from ISCI! :thumbup:
Similar threads
