graeme.g.1957
New member
Hi, I need to raise rear wheel to adjust belt tension but can't see an obvious jacking point. Anyone can advise where it is. Cheers, Graeme
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
F3 Rear wheel jacking point
- Thread starter graeme.g.1957
- Start date
Place motorcycle jack under frame member and lift the whole machine. One will need to experiment with placement to achieve balance front to back and side to side. One should also loosen the axle nut before the machine is lifted as it is tightened to over 160 ft*lbs and the Spyder will move on the jack with that force.
Wayne
Wayne
GaryTheBadger
New member
I put my floor jack under the rear shock lower mounting point.
graeme.g.1957
New member
Thanks for that. Appreciated.
Similar threads
