• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

electrical question

almosthere

New member
Ok I am at a point with my trailer build that I have a question about the electrical system on my 2015 RT-S SE6. I found out at the dealer that my bike puts out 850 watts running at normal speeds. How much of that does the bike need to operate with stock equipment? I have started adding extras ie: 2 12v ports to plug in our smart phones for gps and play list listening. Also 2 ports to plug in heated riding gear, driver and rider could each pull 14.2 amps if we have set at high on all parts of gear. BTW 850 watts = 68 amps at 12.5 volts. When it comes to my question with my trailer I have built it with electric brakes including a battery on the trailer for emergency brake away switch. I want to set it up to charge while towing, with a combination of an inverter and an ac charger. SOOOO how larger of an inverter can I run form the battery leads from the bike?
 
Ok I am at a point with my trailer build that I have a question about the electrical system on my 2015 RT-S SE6. I found out at the dealer that my bike puts out 850 watts running at normal speeds. How much of that does the bike need to operate with stock equipment? I have started adding extras ie: 2 12v ports to plug in our smart phones for gps and play list listening. Also 2 ports to plug in heated riding gear, driver and rider could each pull 14.2 amps if we have set at high on all parts of gear. BTW 850 watts = 68 amps at 12.5 volts. When it comes to my question with my trailer I have built it with electric brakes including a battery on the trailer for emergency brake away switch. I want to set it up to charge while towing, with a combination of an inverter and an ac charger. SOOOO how larger of an inverter can I run form the battery leads from the bike?

I don't know about the 1330 but a few years ago I actually measured the power budget of my 998 RT and came up with around 320Watts (25.2 A @12.7V ) with all equipment running.
 
Fyi do yourself a favor keep trailer battery independent from bike, charge it separately. Its lots easier & wont risk your spyder getting 24V if something fails. If you need more power for whatever you may want to consider solar panels (can also charge battery) & or small generator. ImageUploadedByTapatalk1458772439.557172.jpgfyi found @ tractor supply


I wasn't there but I still care! POW /MIA VETS
 
I see... You're the guy that has the craziest holiday light display.

whatever will you do if your electric nose toaster puts your Spyder's electrical system
into cardiac arrest.

I want to know how heavy is your trailer that it needs brakes.

good luck with your calculations.
 
Here's the thing....

Your dealer is off a bit. The 2015 RT has an alternator as opposed to the pre 14's that ran a stator system. Those put out the 600 +/- but yours puts out over 1200 watts. :thumbup:
 
The brakes are a part of the trailer now and this gives me more peace of mind than you can know. I have hauled trailers alot and one starting to fish tail behind a truck with 4 wheels going down a hill can make you wish you had had trailer brakes. I would never ever want to be in a down hill situation with an emergency stop needed with only the one rear tire to keep control of the trailer. That said the bike has a 40# hitch limit and with the tires, spindles, and hubs with brakes weighing 96# total weight of the suspended trailer on top of that will be about the 400# max the manufacture limits us to. AND before you say wait that's almost 500# rolling weight: yes I understand I might be straining the trans a bit but if I don't do jack rabbit starts I think that should not be a problem and I now have 5 points of braking friction. Even a 300# trailer on a hill with a fast stop would be a pants changing experience IMHO. The trailer battery will be isolated from the bike if I run the bike leads to the inverter only. Then plug the AC battery charger into the inverter to charge the battery. Nice to know the dealer under stated the output of the bike. I have seen inverters wattage range from 30 watts all the way up to 3000 watts and everything in between. My dilemma is lithium ion battery in the trailer charges best with a higher wattage charger and I would like to put the largest inverter at the end of the bike leads that it can safely handle.
 
Ok I am at a point with my trailer build that I have a question about the electrical system on my 2015 RT-S SE6. I found out at the dealer that my bike puts out 850 watts running at normal speeds. How much of that does the bike need to operate with stock equipment? I have started adding extras ie: 2 12v ports to plug in our smart phones for gps and play list listening. Also 2 ports to plug in heated riding gear, driver and rider could each pull 14.2 amps if we have set at high on all parts of gear. BTW 850 watts = 68 amps at 12.5 volts. When it comes to my question with my trailer I have built it with electric brakes including a battery on the trailer for emergency brake away switch. I want to set it up to charge while towing, with a combination of an inverter and an ac charger. SOOOO how larger of an inverter can I run form the battery leads from the bike?

I have a reasonably priced multimeter with DC Amp capability from Sears. With all you are trying to do it might be worth purchasing one and then measuring how many amps you are pulling as you add gear.
 
Back
Top