Doggone SpeedBumps *argh* - What Part/# do I need?

[CANUSASwede]

Have floorboards. About 100' from speedbump to space I parked in. Went to reverse into space and that's when it was noticed... floorboard was dragging. All else is intact, tho fairly certain will be upgrading the floorboards in this process. In the meantime, can't use any floorboard HELP! Thank you

 

[sealfloorboards]

Ouch!!! What a bummer. When I go over a speed bump, I try to go over at an angle so each tire goes one at a time. Helps greatly to not bottom out. You might check out my Seal RS SE5 Floorboards. They are very tough and I'v never had a problem with speed bumps or bottoming out on either my RS or RT. Contact me directly and I will drop the $45. Shipping charges.
Good luck, and ride in comfort,
John

 

[CANUSASwede]

thank you. however, at the moment, just trying to identify a Part Nomenclature/# to search for. coming up with bupkiss at www.canampartshouse.com, no matter the diagram I zoom in on.

 

[Snowbelt Spyder]

Would that be a Foot Support, or Foot Peg Support, as shown on Body and Accessories Rear diagram?

 

[CANUSASwede]

:bowdown:
LH Front Foot Peg Support

THANK YOU!!!

PN#: 705003335