NoLmtz
New member
I just finished installing my LED's on the front of my '13 STS last night. I decided to take the DIY route and order the components that I fealt were best for the money. Below are a few pics of what they look like!
LEDS: 3 Chip SMD 5050
Lumen: 380 lm/ft
Color: Cool White
Strip Finish: Black
Waterproofing: 10mm LED sleeve
Attachment: Silicone glue
Location: Top and bottom A frame arms. 1 Ft per arm. Each side has an equivalent 760 lumen and the bike has a front projection (without headlights) of about 1540 lumen equivalent. I angled them down a bit since they are so bright... but I should definitely be seen.
https://www.superbrightleds.com/mor...-with-lc2-connector/1465/#/tab/Specifications
LEDS: 3 Chip SMD 5050
Lumen: 380 lm/ft
Color: Cool White
Strip Finish: Black
Waterproofing: 10mm LED sleeve
Attachment: Silicone glue
Location: Top and bottom A frame arms. 1 Ft per arm. Each side has an equivalent 760 lumen and the bike has a front projection (without headlights) of about 1540 lumen equivalent. I angled them down a bit since they are so bright... but I should definitely be seen.
https://www.superbrightleds.com/mor...-with-lc2-connector/1465/#/tab/Specifications