Dip bean not working Main Headlights ok - European Model

[eddieshep999]

I have a 2010 RT-S SE5 Model Spyder

Because I live in the UK We have the European Spec Headlights - Top lights are Main Beam and selected by the Switch on the LHS Cluster - The dipped Headlights are located where USA/Canadian models can fit fog lights
These should be on once the engine is running and can't be switched off

Went for a ride and it was noticed my Dipped beams are not working - Have checked a fuse under the seat marked Headlights 30A looks ok - Changed it for a new one and still no dipped Headlights - Main beam ok I also get the cluster display the high beam symbol

Could not see any other fuse or relay for just the dipped beams not sure if both dipped headlight bulbs could have blow or if you need both to work to create the circuit

No active codes shown in cluster

Can anyone point me in the right direction

Not done anything to the lights - All Rear lights , Indicators, fender and number plate lights ok

Thanks

 

[donec]

I would check to see if the plug may have gotten disconnected and check to see if both bulbs are still good. If they were wired in serial then if one bulb burns out both will be off.