corbin seat update

[tatt2r]

took spyder out for a 250 mile cruize yesterday with the better half we started day at around 30 degrees and i have to say heated seat was great .... the comfort of this seat was awesome for me and my girl loved it too .... also installation wasnt too bad either except for crappy way they hook up power lead but lamont helped out on that end ...
personally i think this is the best mod i have done yet ... http://www.spyderlovers.com/forums/...hment.php?attachmentid=880&stc=1&d=1234454301

 

[SpyderGirl]

Yeah, isn't the heated seats great!? Glad to hear you're loving your Corbin seat. It's definitely one of our best investments.

 

[ataDude]

Ruh, roh... extra large windshield is next! :clap: :yikes:


.

took spyder out for a 250 mile cruize yesterday with the better half we started day at around 30 degrees and i have to say heated seat was great .... the comfort of this seat was awesome for me and my girl loved it too .... also installation wasnt too bad either except for crappy way they hook up power lead but lamont helped out on that end ...
personally i think this is the best mod i have done yet ... http://www.spyderlovers.com/forums/...hment.php?attachmentid=880&stc=1&d=1234454301

 

[tatt2r]

Ruh, roh... extra large windshield is next! :clap: :yikes:


.

:yikes::yikes::yikes::yikes::banghead::hun::banghead::barf:

 

[bjt]

Ruh, roh... extra large windshield is next! :clap: :yikes:


.

:yikes::yikes::yikes::yikes::banghead::hun::banghead::barf:

 

[Lamonster]

Ruh, roh... extra large windshield is next! :clap: :yikes:


.

:agree:

Something like this maybe :2thumbs:

 

[Jake007]

AM putting new corbin seat on, mine has no gap on the left side where the seat meets the grab bar for the rider and a 3/8 of an inch gap on the right side between the seat and the grab bar. And I really have to offset the oblonged bracket holes in order to use seat lock.. Any one else have these issues..???? Maybe I am just too fussy....:dontknow:

 

[Lamonster]

AM putting new corbin seat on, mine has no gap on the left side where the seat meets the grab bar for the rider and a 3/8 of an inch gap on the right side between the seat and the grab bar. And I really have to offset the oblonged bracket holes in order to use seat lock.. Any one else have these issues..???? Maybe I am just too fussy....:dontknow:

First thing I did was make a drop bar so the stock ram doesn't tweak the seat. I think Corbin got rid of the stock ram and did the same thing.

Next I got rid of the locking pin. I see no real reason to use it.

I just slotted my holes a little longer too so I could move the seat back a bit.

 

[tatt2r]

AM putting new corbin seat on, mine has no gap on the left side where the seat meets the grab bar for the rider and a 3/8 of an inch gap on the right side between the seat and the grab bar. And I really have to offset the oblonged bracket holes in order to use seat lock.. Any one else have these issues..???? Maybe I am just too fussy....:dontknow:

nope fit first shot took two adjustment to clip down

 

[Jake007]

Thanks guys, Lamont How long did you make your prop rod. Next will be install for 4 inch risers, then triple play, givi bags should be here maybe tomorrow...:yes:. I cant seem to stop ordering stuff now that I have started...:clap:

 

[tatt2r]

Thanks guys, Lamont How long did you make your prop rod. Next will be install for 4 inch risers, then triple play, givi bags should be here maybe tomorrow...:yes:. I cant seem to stop ordering stuff now that I have started...:clap:

Did you buy a older seat cuz corbin puts prop rod on seats now

 

[Jake007]

I bought the seat last fall from a guy who sold his spyder due to back issues. the seat was never out of the box.... I looked at the corbin site and seen they had a little rubber bumper on the end... Will make a rod tomorrow....

 

[tatt2r]

I bought the seat last fall from a guy who sold his spyder due to back issues. the seat was never out of the box.... I looked at the corbin site and seen they had a little rubber bumper on the end... Will make a rod tomorrow....

nice good luck seat is well worth the money

 

[crazycanuck]

nice good luck seat is well worth the money

yes good to hear cause I am thinking of getting it at their factory

 

[Jake007]

Mine are heated and have the back rests... Sat on it already what a difference... cant wait to get risers on tomorrow...

 

[4leafpat]

My Corbin fit fine, I even got the damper to work right, but had to turn it around from the way it was installed on stock seat.

 

[Jimmy Neutron]

Wow you guys are lucky I want a corbin but my wife says I must pay the Spyder off before I can do that.. Wow But butt may get sore..:banghead:

 

[tatt2r]

Wow you guys are lucky I want a corbin but my wife says I must pay the Spyder off before I can do that.. Wow But butt may get sore..:banghead:

take off your apron and tell her I'm buying a seat and your going to like it

 

[crazycanuck]

take off your apron and tell her I'm buying a seat and your going to like it

I used that tactic when buying the :spyder: but I did it over the phonepps:

 

[Jimmy Neutron]

yeah but then i would have nothing on