Compatability question about Sena SMH10 with older Nolan helmets

[cognaccruiser]

I have decided that the Sena SMH 10 headset is the way I want to go for our Spyder (when it arrives). My only concern is that the SMH 10 units are a little bulky. We have older Nolan modular helmets which are still in good condition. Mine is an N 102 and my wife's is an N 100 Classic. Does anybody have any experience with mounting the SMH 10 on these older models. I have seen where people have mounted SMH 10's on N 103's. My N 102 has an Edset headset right now and I did a little trimming of the plastic molding that runs around the bottom of the helmet to make a good fit. Not opposed to doing that. The other concern along similar lines is whether the bulkiness of the SMH 10 will interfere with closing the flip front once installed. I know that the Sena has an external Velcro mounting also but have read that it isn't as solid as the clamp.
I hope some body has some experience with this.
Thanks for any info and insight

Gary

 

[NancysToy]

I don't know exactly how old your helmets are, but you may wish to consider getting some new ones for the occasion. Most helmet manufacturers recommend replacement five years from date of first use or seven years from the date of manufacture shown on the sticker beneath the helmet liner. Some manufacturers even go as low as 3/5 years in their recommendation. Fiberglass helmets are said to become brittle over time, although I have never seen test results to support that theory. Plastic shell helmets are an unknown, but ozone and UV light probably take a toll there, too. I replace my helmets every 3-4 years, and the old one becomes my backup until the tag expires. The old backup is destroyed and discarded. It all comes down to the old question of "What is your head worth?" After a severe head injury on a motorcycle, I have decided to keep mine protected in the best way possible.

Sorry, I ddin't mean to lecture, but your question was a good reminder to check the age of your helmets once in a while.

 

[Dan McNally]

I don't know exactly how old your helmets are, but you may wish to consider getting some new ones for the occasion. Most helmet manufacturers recommend replacement five years from date of first use or seven years from the date of manufacture shown on the sticker beneath the helmet liner. Some manufacturers even go as low as 3/5 years in their recommendation. Fiberglass helmets are said to become brittle over time, although I have never seen test results to support that theory. Plastic shell helmets are an unknown, but ozone and UV light probably take a toll there, too. I replace my helmets every 3-4 years, and the old one becomes my backup until the tag expires. The old backup is destroyed and discarded. It all comes down to the old question of "What is your head worth?" After a severe head injury on a motorcycle, I have decided to keep mine protected in the best way possible.

Sorry, I ddin't mean to lecture, but your question was a good reminder to check the age of your helmets once in a while.

"If you have a $50 brain, get a $50 helmet . . . adjust for what you think your brain is worth!"

 

[oldguyinTX]

Don't know how the SMH10 fit older helmets, but they fit the BRP modular helmets perfectly without using the Velcro. There are pockets in the helmet for the speakers. I use an SM10 dongle that you can mount on the rear panel of the frunk. You can buy these as a set with the SM10 & (2) SMH10's. Not cheap, but they really do work well. They are also upgrade-able with new firmware from SENA. Hope this helps.

 

[cognaccruiser]

I don't know exactly how old your helmets are, but you may wish to consider getting some new ones for the occasion. Most helmet manufacturers recommend replacement five years from date of first use or seven years from the date of manufacture shown on the sticker beneath the helmet liner. Some manufacturers even go as low as 3/5 years in their recommendation. Fiberglass helmets are said to become brittle over time, although I have never seen test results to support that theory. Plastic shell helmets are an unknown, but ozone and UV light probably take a toll there, too. I replace my helmets every 3-4 years, and the old one becomes my backup until the tag expires. The old backup is destroyed and discarded. It all comes down to the old question of "What is your head worth?" After a severe head injury on a motorcycle, I have decided to keep mine protected in the best way possible.

Sorry, I ddin't mean to lecture, but your question was a good reminder to check the age of your helmets once in a while.

Thank you for your reply. I took it positively, not as a lecture. You are correct and I must admit that I had sort of lost sight of their age, especially the N 100 which is pushing 10. The other is 5+ now. Since reading your reply I have been reading much about when to replace and as always there are many opinions. The consensus seems to be 5 +/- years and ours have been well cared for. As such I think that it is time to look for new and that makes the fitment issue a non issue.

oldguyinCT. Thanks for the info. It is helpful.

Cheers, Gary

 

[Chupaca]

No problem..!!

you should be able to mount it on the older helmets. Newer ones with the pop out liners are easier but I agree with Scotty on looking into the age and condition of you present helmet. Try to keep in mind the use and abuse your helmets have had as well. You know fallen off the bike or table, been in some accident etc...:thumbup: