• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

chirp squeak little bird

mstella101

Member
Looking for some insight for a chirping /squeaking sound after the bike has been running for awhile. 2017 F3 LTD. It happens when I brake but also after when I take foot off brake and I'm stopped. The sound comes from the front , back and sometimes it sounds like right under my seat. On Monday it goes in for recall check, oil change and now to find out what this sound is. It sounds like it usually comes from left side. Could it be brakes? A symptom of the sprocket and belt? I'm stumped. Any insight is helpful.
 
Looking for some insight for a chirping /squeaking sound after the bike has been running for awhile. 2017 F3 LTD. It happens when I brake but also after when I take foot off brake and I'm stopped. The sound comes from the front , back and sometimes it sounds like right under my seat. On Monday it goes in for recall check, oil change and now to find out what this sound is. It sounds like it usually comes from left side. Could it be brakes? A symptom of the sprocket and belt? I'm stumped. Any insight is helpful.

Make sure Everything is tight ..... my Rotors are older than yours and are still TRUE ...... Can you jack up your spyders and SPIN the front wheels ????? ..... keep us informed ..... Mike :thumbup:
 
Thanks Mike- gonna have to borrow my neighbors jack to check- When I look at the rotors they look good- I'm not sure what good looks like- there are no grooves in rotor.
 
Thanks Mike- gonna have to borrow my neighbors jack to check- When I look at the rotors they look good- I'm not sure what good looks like- there are no grooves in rotor.

Looks can / are deceiving ...... 1 mm off is going to cause a problem ..... If you have a concern that the rotor may be warped, remove it from the wheel and put it a well supported piece of glass .... then try and slide a thin piece of paper under it , try in at least 8 places ...... if warped this will tell you ..... good luck ....Mike :thumbup:
 
Back
Top