• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Check Engine

PLZDVM

New member
So I leave this am and the check engine message with the light pops on, I stop, restart and the ride goes fine.
Leavibng my office to for lunch and there it is again, I stop, restart and again the ride goes fine.
Is this anything specific?
Do I need to take it in ?
Could it be a gas issue?
I did play around swapping mufflers, but the original is back on, could I confused the computer?
Thanks
 
Next time check for active codes b4 you turn off the :spyder:Since you don't say what year/model you have I can't tell you how to get them,instructions in your owners manuel
 
Sorry, its a 2010 RS, SM5
Did not see an error code, just the ck engine rolling across the speedo, and the small half moon light .
 
Let's see..!!

I have had this a couple of times. Checked oil and add to full mark and went away. But check and see if you have any codes while it is lit...:gaah:
 
Next time it happens,pull over but leave it running,press mode till you are displaying Eng. Hrs then hold mode down and Flash the high beam switch 5 times(within 2 sec.) it should show error code(s) or "No active fault" write it down and look up code when you get home,or post here and some one will tell what it means(or get Rodgers app for you phone)
 
Back
Top