Cell Phone Charger

[Fire34]

Looking to take our second road trip this spring, we just stayed local on our first one. I was wondering if there is a way to run a cell phone charging cable up to the handle bars? I am looking to get an X grip etc. My Zumos worked well on the local trip but i dont know if I want to spend the money to update it. Thanks guys

Dave

 

[quasi]

on my RT-S I removed the temp and fuel gauges and installed a dual usb port on one side and a volt meter on the other. used the existing wiring.

 

[Highwayman2013]

Try here.http://www.lamonstergarage.com/lamonster-rt-dual-power-plate-with-x-grip/

 

[SPYD3R]

mine

try any of these.....
https://www.ebay.com/sch/i.html?_fr...+Holder+with+USB+Charging+Port+Black&_sacat=0
i've had mine for over a year, and it works great....

you may also want to order a 9 inch power cable while you are at it....
Dan P
SPYD3R

 

[Mazo EMS2]

I added a dual usb port to one of the speaker grilles, and a regular 12V outlet to the other speaker grille. I use them for the phone and the GPS. Wired so that it's powered with key on. Many have also replaced the analog gages as mentioned above.

 

[JayBros]

You don't tell us year and model of Spyder. FWIW, if you wanted/needed to keep your gauges there is a wire harness connection behind the left side of the frunk on the '14 and later RTs (don't know about earlier RTs) for those who want a 12v cigarette or USB port in the frunk. You could run a cable from that connection point to wherever you desired in the vic of handlebars. Were I in your boots I'd do the voltmeter/USB replacement of the gauges, although with a 1330 engine I don't really see a need for a voltmeter.

 

[SpyderConvert]

Phone Charger

If you have a Battery Tender connection in your frunk, there is an accessory that you can use to charge your phone or GoPro.

 

[Fire34]

Model

You don't tell us year and model of Spyder. FWIW, if you wanted/needed to keep your gauges there is a wire harness connection behind the left side of the frunk on the '14 and later RTs (don't know about earlier RTs) for those who want a 12v cigarette or USB port in the frunk. You could run a cable from that connection point to wherever you desired in the vic of handlebars. Were I in your boots I'd do the voltmeter/USB replacement of the gauges, although with a 1330 engine I don't really see a need for a voltmeter.

My spyder is a 2013 RT Limited if that helps