• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Can't find the Horn/wires - 2019 RT Ltd

TD1083

New member
2019 Spyder RT Limited Horn upgrade, can't find horn/wires.
Found them, underneath the right front; drop the panel by the sway bar links, 1 torque 30 screw and 3 push pins.
Its right there looking at you. Unscrew the nut & just observe polarity when you extend the wiring to your new horn.
 
Last edited by a moderator:
Hi, thanks for your response. but, its not there! Left service panel your talking about the Rotax panel?
 
That's also where it is on my 2015 RT-S. However, it's buried deep in the left side beneath the fog light on my wife's 2012 RTL. I suspect BRP made a mistake and accidentally moved the horn to a rather more accessible location for a few years, then discovered the error of their ways and buried it once again.
 
That's also where it is on my 2015 RT-S. However, it's buried deep in the left side beneath the fog light on my wife's 2012 RTL. I suspect BRP made a mistake and accidentally moved the horn to a rather more accessible location for a few years, then discovered the error of their ways and buried it once again.

You know, your comment would be rolling on the floor hilarious if it weren't so true.
 
When I installed a new Bad Boy horn on my 18 RTL, I found the horn in almost the center behind the Swaybar. I installed my new one in the left side panel area where everyone said they were before. I ran the wiring to the other horn area and plugged in the new horn and left the original horn where it was at.
 
Speaking of horns does anyone sell something to stop the accidental bumping of the horn when trying to use the signal lights ?
 
Back
Top