bone crusher
Alignment Specialist
Does it provide wind protection for your hands? It can be quite windy here in MD...
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
C.H.A.D. is here...
- Thread starter ataDude
- Start date
Industries 7
New member
Hello All,
to get to the matter of the subject...
We tested these brackets and windshields thoroughly in the wind tunnel tests, and noting came up, so this must be an isolated incident. BUT this said, being a responsible company, since there was an isolated incident and that we surly don’t want to have any issues with the performance or stability of the C.H.A.D, we found something that will resolve this issue, if issue there is. We will add a hard plastic washer and new bolt sets to all new C.H.A.D that will be shipped, and for those of you that already purchased it and want to get these parts, email me at [email protected] with your full address and phone number and I’ll be happy to send you a set for free. ‘’A Hard plastic washer between the 2 metal sliding parts at all 4 holes with a longer bolt set, and the issue is gone! Locked tighter than you can imagine.. I attached a schema with the actual dimensions the washer needs to have…Please don’t use the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We ordered Today a large quantity of these washers and bolts and we should be receiving them in around 1-2 weeks. So all new C.H.A.D windshields will have these right in the box, and like I said, if you already have your C.H.A.D and want these parts drop me an email’’
Have a great Ride!!! :thumbup:
to get to the matter of the subject...
We tested these brackets and windshields thoroughly in the wind tunnel tests, and noting came up, so this must be an isolated incident. BUT this said, being a responsible company, since there was an isolated incident and that we surly don’t want to have any issues with the performance or stability of the C.H.A.D, we found something that will resolve this issue, if issue there is. We will add a hard plastic washer and new bolt sets to all new C.H.A.D that will be shipped, and for those of you that already purchased it and want to get these parts, email me at [email protected] with your full address and phone number and I’ll be happy to send you a set for free. ‘’A Hard plastic washer between the 2 metal sliding parts at all 4 holes with a longer bolt set, and the issue is gone! Locked tighter than you can imagine.. I attached a schema with the actual dimensions the washer needs to have…Please don’t use the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We ordered Today a large quantity of these washers and bolts and we should be receiving them in around 1-2 weeks. So all new C.H.A.D windshields will have these right in the box, and like I said, if you already have your C.H.A.D and want these parts drop me an email’’
Have a great Ride!!! :thumbup:
bone crusher
Alignment Specialist
Hello All,
to get to the matter of the subject...
We tested these brackets and windshields thoroughly in the wind tunnel tests, and noting came up, so this must be an isolated incident. BUT this said, being a responsible company, since there was an isolated incident and that we surly don’t want to have any issues with the performance or stability of the C.H.A.D, we found something that will resolve this issue, if issue there is. We will add a hard plastic washer and new bolt sets to all new C.H.A.D that will be shipped, and for those of you that already purchased it and want to get these parts, email me at [email protected] with your full address and phone number and I’ll be happy to send you a set for free. ‘’A Hard plastic washer between the 2 metal sliding parts at all 4 holes with a longer bolt set, and the issue is gone! Locked tighter than you can imagine.. I attached a schema with the actual dimensions the washer needs to have…Please don’t use the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We ordered Today a large quantity of these washers and bolts and we should be receiving them in around 1-2 weeks. So all new C.H.A.D windshields will have these right in the box, and like I said, if you already have your C.H.A.D and want these parts drop me an email’’
Have a great Ride!!! :thumbup:
That's what I call customer service...:2thumbs: When I get a new windshield sometime later this year, I'll give ya a holler!
ataDude
Mod Maniac
Email sent. Thanks for the quick response!
A Hard plastic washer between the 2 metal sliding parts at all 4 holes with a longer bolt set, and the issue is gone! Locked tighter than you can imagine.. I attached a schema with the actual dimensions the washer needs to have…Please don’t use the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We ordered Today a large quantity of these washers and bolts and we should be receiving them in around 1-2 weeks. So all new C.H.A.D windshields will have these right in the box, and like I said, if you already have your C.H.A.D and want these parts drop me an email’’
Have a great Ride!!! :thumbup:
Last edited:
mrb
New member
Hi All
Same here- a timely response.
[FONT="] “[/FONT][FONT="]Hello Martin, [/FONT]
[FONT="]OK we tested the rake adjustment, it need a lot of force to get back down, but it does go back down, so we don’t want that to be an issue with our windshields..We brainstormed last night and found a simple solution. [/FONT]
[FONT="] [/FONT]
[FONT="]A hard plastic washer between the 2 metal sliding parts with a longer bolt, and the issue is gone! We jumped on the brackets and it wouldn’t even go down..so there is the fix. I attached a schema with the actual dimensions the washer needs to have…Please don’t suggest the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We will have these parts in 2weeks around, time to order big quantities and all, or clients can just go out and purchase these at very low cost.[/FONT]
Same here- a timely response.
[FONT="] “[/FONT][FONT="]Hello Martin, [/FONT]
[FONT="]OK we tested the rake adjustment, it need a lot of force to get back down, but it does go back down, so we don’t want that to be an issue with our windshields..We brainstormed last night and found a simple solution. [/FONT]
[FONT="] [/FONT]
[FONT="]A hard plastic washer between the 2 metal sliding parts with a longer bolt, and the issue is gone! We jumped on the brackets and it wouldn’t even go down..so there is the fix. I attached a schema with the actual dimensions the washer needs to have…Please don’t suggest the star metal washers since these will strip the paint off the brackets and eventually allow rust to come through. With the plastic washer that won’t happen. We will have these parts in 2weeks around, time to order big quantities and all, or clients can just go out and purchase these at very low cost.[/FONT]
Similar threads
