BRP trailer hitch

[nslowmotion]

Is it normal for a BRP trailer hitch to have about 1/2 to 3/4 inch up and down movement at the ball in the hitch. Just noticed it today and did not know if it was normal or not.:dontknow:
Thanks

 

[SpyderAnn01]

Are you pulling a RT622? If not maybe your trailer calls for a different sized balll. I don't have an play like that on my trailer.

 

[nslowmotion]

Without a trailer on it. Just pulling up and pushing back down on the hitch, it will move a little bit

 

[happyspyder2039]

Is it normal for a BRP trailer hitch to have about 1/2 to 3/4 inch up and down movement at the ball in the hitch. Just noticed it today and did not know if it was normal or not.:dontknow:
Thanks

mine dosent move

 

[BLUEKNIGHT911]

WHAAAAAAAAAAAAAAAAAAAAAAAT

:yikes:..........Something is not tight on your Hitch assembly............The ball itself has a threaded shaft and a large nut on the underside, I would check if it is loose...........If the entire HOOP can be moved / giggled on the swing arm check all the bolts and nuts....it may be about to fall off...................Mike :thumbup:

 

[Bfromla]

Better description

Plz identifty what part,parts are moving. If dealer installed, miles in use. Few things will help us answer you question accuratly. Thx

 

[Bob Denman]

:shocked: That's not right... don't hook up to it until everything is nice and snug, and NOT moving around.

 

[Papa Jim]

You need to adjust the nut under the hitch till it's snug against the ball and still able to pull down latch on top.be sure to add a little grease should have very little play.....