BRP bag help

[sls3000]

Sorry if this is a dumb question, I've got the saddle bag kit on the way and I'm trying to get the spider prepared while I'm waiting. The problem I'm having is getting the turn signals off. Maybe I'm not trying hard enough, but as I turn the nut on the inside to loosen the bolt the signal turns on the outside and looks like I would break something if I forced it.

Thanks again, all the information on this site has been invaluable.

Scott

 

[Firefly]

Sorry if this is a dumb question, I've got the saddle bag kit on the way and I'm trying to get the spider prepared while I'm waiting. The problem I'm having is getting the turn signals off. Maybe I'm not trying hard enough, but as I turn the nut on the inside to loosen the bolt the signal turns on the outside and looks like I would break something if I forced it.

Thanks again, all the information on this site has been invaluable.

Scott

If memory serves you just have to hold it tight with your hand while you loosen the nut...

This thread might help you some on the install:

http://www.spyderlovers.com/forums/showthread.php?t=11653

 

[fastfraser]

welcome Good luck with your install.

 

[ntxYguy2009]

welcome

David

 

[Yazz]

:congrats: on getting your Spyder. Let the mods begin.:2thumbs:

 

[retired1]

welcome

 

[docdoru]

welcome:congrats: for your Spyder: this is just the down payment for the future mods...

 

[Capt John]

:congrats::yes::yes:welcome
If you don't have ESI's triple play and BRP bag light kit? It would be a great time to install them while you have the :spyder2: apart. They make a world of difference. Here a link to the bag lights and triple play.

http://www.esicycleproducts.com/spyderGIVIsaddlebaglights.html

http://www.esicycleproducts.com/spydertripleplay.html

 

[sls3000]

Hi, thanks for the well wishes and advise, I just need to put some elbow grease into it. Just finishing up the install now.

Scott