Brake pedal pad

[Cindi]

Can someone tell me how to remove the brake pedal pad. I see that there are two bolts on the underside of the pedal, but I cannot fit a wrench or socket in there to remove them.

 

[Copperman]

Can someone tell me how to remove the brake pedal pad. I see that there are two bolts on the underside of the pedal, but I cannot fit a wrench or socket in there to remove them.

A socket will work. It's a little tricky getting it on, but it will go on. If I remember right, it's a 10mm or 11mm socket.

Good luck.

 

[jerpinoy]

What are you planning to do?

 

[Bob Denman]

It's a 10mm... :thumbup:
A 1/4" drive works best in those tight quarters.

 

[HayRog]

It's a 10mm... :thumbup:
A 1/4" drive works best in those tight quarters.

Ditto. ^^^^^^^
Just replaced mine and collapsed the foot board for easier access.

 

[Cindi]

Brake pedal

What are you planning to do?

I plan to see if I can do a little "reengineering" to create a brake pedal that is wider left to right than the stock pedal. I find I turn my foot in to engage the brake pedal, and my toe kicks the body panel. A pad/pedal that is wider would allow me to simply raise my foot and bring it straight forward to engage the brake. I already have a pad and a piece of stiff metal to attach to the stock pedal bracket.

 

[SpydermanCT]

Might this work for you ?

http://www.tricledusa.com/#!product/prd1/4410520201/full-size-brake-pedal-for-all-spyders

 

[Motorcycledave]

You will find several vendors who already
have larger brake pedals for your Spyder
right here on this forum

Can someone tell me how to remove the brake pedal pad. I see that there are two bolts on the underside of the pedal, but I cannot fit a wrench or socket in there to remove them.

 

[Bob Denman]

TricLED's pedal...