• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Brake lever position - do I need a longer brake rod to move it?

R

Ridethru

New member
I'm a proud owner of a new 2020 Spyder F3T coming from a street glide I think its great but I don't like the position of the brake lever. I understand I can move the foot pedal to position 4 or beyond but does that mean I need to purchase a longer brake rod? This just moves the assembly forward but doesn't lean the the pedal any further forward correct? Seems like an odd ball design to me.

Here is my new machine...
Screenshot from 2021-05-07 23-14-50.jpg
 
I thought that I needed to go to position 4 on my F3. I have a 29-30 inch inseam. When I moved the floorboards to that position they were too far forward for me. So I left them where they were, but ordered the Lamonster #3 brake rod, which will lower the brake pedal. Much easier to hit the pedal now. Should have come this way from the factory.
 
When I bought my '16 F3 Limited it didn't take me long to see where my feet landed naturally. I then changed my floorboards to the # 4 position. If you move the floorboard, you also need to change the brake rod. Check with Lamonster Garage for their brake rod. It changed the angle of the brake pedal.
 
I have looked at lamonster but their page says they're not for stock pegs just for floorboards. So it seems I'm back to buying the BRP rod and drilling a hole to drop the pedal a little bit if that is the correct procedure???
 
Ridethru said:
I have looked at lamonster but their page says they're not for stock pegs just for floorboards. So it seems I'm back to buying the BRP rod and drilling a hole to drop the pedal a little bit if that is the correct procedure???
Click to expand...

I'm sorry. I passed right by where you said you had an F3T.
 
I just drilled an extra hole in my clevis to adjust the pedal lower. You can make minor adjustments using washers under the rubber. Might need longer M6 bolts for that.


brake-rod.jpg
 
I had my foot rest moved to the 5 position ordered the brake rod through the dealer , was about$30 and they put it on for free ..
 
You all are awesome! I appreciate the input. I bought a position 4 rod and moved the pegs. Much better. I also bought the pos 5 rod but thats probably too long.
 
I have a 2020 f3s I bought the #3 brake rod from lamonster and it works great on my stock
pegs.i am fixing to buy the longer brake
pedal
 
You must log in or register to reply here.

Similar threads

O
Here's My F3-S Left Side Brake Pedal Conversion
Replies
5
Views
308
Outtomunch
O
Pikester
Does Changing peg position on 23 F3-T need a longer brake rod?
Replies
12
Views
1K
Pikester
Pikester
flapjackandbeans
Foot Brake vs Handlebar Brake - would it be better for me?
Replies
6
Views
379
Jetfixer
Jetfixer
JamesLaz
Need help in Locating the Parking Brake Bracket Part Number? Anyone help?
Replies
8
Views
2K
Snowbelt Spyder
Snowbelt Spyder
O
2019 RT brake pedal still travels too far with new front pads installed. How do I get it back to normal?
Replies
13
Views
537
redrazor
redrazor
Back
Top