Not sure how long this topic has been discussed lately but here it goes. I have a 2017 RT Limited. I want the music to stream to my helmet via bluetooth so I don't have to use the speakers on the bike. The RT cannot stream radio music via the Garmin. I also don't need the big expensive entertainment harness from Cam-Am plus it doesn't provide the signal either that I need. I have a small BT transmitter similar to the Sena SM10 to use inside the back trunk. I want to make a cable to go to the radio accessory plug-in on the radio to tap into the line out pins to provide the signal. I am very versed at doing electronic repair so this is not a big deal but would like to know the pin-out of the connector on the radio before hand to save on some time having to probe the pins for the correct ones. I know that Motorcycle Dave sells the SM10 along with a cable he makes as a complete package but not sure if he sells just the cable and how much. I have plenty of cables to make a simple cable and don't want to purchase the SM10 since I already have a transmitter. So if anyone could provide the pin-out info for the radio it would be greatly be appreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
HowTo: Bluetooth (Sena SM10 dongle) homemade harness revisited
- Thread starter ColemanJ
- Start date
Similar threads
