• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Blinking signal

ITWorkerBee

ITWorkerBee

New member
Yesterday the right turn signal did not come on in reverse, but the signal was working. Since it was late/hot thought would deal with in am. Today it was working, and as it warmed up it stopped again. Must be a loose wire in the console area? How hard is it to get to those connections or just take it to stealership?
RSS SE5 2014
 
Depends....

If you pop out the inst cluster you can get to all the wiring. That would be for the fronts for the rears you need to remove the fender pan...:thumbup: might test the bulbs first...
 
Same issue any updates

I just pickup a 2013 yesterday and have the same issue, hazards works all lights flash, however the right turn signal doesn't work any updates?
 
You must log in or register to reply here.

Similar threads

D
Turn signals work sometimes; hazards always - maybe a Cluster problem?? Ideas?
Replies
12
Views
2K
deadboltdon
D
cruisinTX
Anyone else experienced this Thumping noise when turning? Ideas on Cause and/or cure?
Replies
5
Views
1K
Two2Three
Two2Three
A
Button, button, who's got the button? Lost the Turn Signal Button!
Replies
6
Views
2K
Jetfixer
Jetfixer
B
Brake Failure RT - Can I reset the fault codes?
Replies
11
Views
2K
bigcontender
B
T
2013 Spyder ST new owner, Clutch problem - Any Ideas?
Replies
0
Views
3K
Tomguitar
T
Back
Top