• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Battery Replacement for SENA SMH10 Dual

Yes. Cut the plug off the old ones leaving enough wire to work with, soldered, heat shrink, and reassembled. 20 minutes each.
 
I have repaired several Sena, Scala, and GPS batteries for people here over the last year.
I do it for free. You pay for the batteries and shipping nothing more.

Anyone that doesn't have the soldering skills etc to do it, feel free to contact me.

Bob
 
I have repaired several Sena, Scala, and GPS batteries for people here over the last year.
I do it for free. You pay for the batteries and shipping nothing more.

Anyone that doesn't have the soldering skills etc to do it, feel free to contact me.
Bob
That sounds tempting Bob but the shipping from Florida to you and back might be a game changer.
I just need to get a new soldering iron - the one I have is yuge.
Know anyone that needs 6 Keenstone K011003 batteries for their helicopter?
I purchased them with the understanding they would work...........but are too yuge.
(whispering This is Bill Rouse)
 
That sounds tempting Bob but the shipping from Florida to you and back might be a game changer.
I just need to get a new soldering iron - the one I have is yuge.
Know anyone that needs 6 Keenstone K011003 batteries for their helicopter?
I purchased them with the understanding they would work...........but are too yuge.
(whispering This is Bill Rouse)

It's about $13 round trip for USPS shipping. Have done it a few times for people in Florida.
But it's not hard so a fine tip 15 watt iron is all you need. Just be careful with ESD (Electro Static Discharge).

Bob
 
It's about $13 round trip for USPS shipping. Have done it a few times for people in Florida.
But it's not hard so a fine tip 15 watt iron is all you need. Just be careful with ESD (Electro Static Discharge).

Bob
It would cost me more than 13 bucks for a new soldering iron.................I'll let you know.
 
Back
Top