Bars & Links Update

[BajaRon]

Wondering if you got the link issues ironed out and are shipping today?
Thanks
Magdave

I've been told that the proper usage is 'Problems' not 'Issues'. But Tomato, Tomahto.

All current orders shipped today. It wasn't so much issues as just the time needed to get all the parts to the specs I wanted (ok, maybe that is the same thing). I still have not gotten the instructions done. We got a lightning storm last night and my power was out for a few hours.

I will be emailing the install instructions to everyone later today. It's not difficult but there are 1 or 2 things that need to be done a certain way.

Thank you all for your patience.... again!

Lamont used to list me as the 'Always Late Member'. I never could figure out why.... :dontknow:

 

[Bob Denman]

Lamont used to list me as the 'Always Late Member'. I never could figure out why.... :dontknow:

That IS curious :shocked: .. You're still alive; right?

 

[BajaRon]

Custom Performance Heim Joint Link Install Instructions

I sent out the Custom Performance Heim Joint Link installation instructions this morning. This is probably the easiest mod install you'll ever do to your Spyder other than the IPS Key Cover.

If you purchased a Link Kit from me you will receive an email with the instructions attached, (same email address as your Paypal account is attached to).

If you ordered a set of these Performance Links and you did not receive the instructions by email please let me know by emailing me at [email protected]

As always, feedback is greatly appreciated. :thumbup:

 

[Bob Denman]

Thanks for this update! :thumbup:

 

[Bob Denman]

Ron,
I'll send an email too...
But would it be possible to simply post the instructions in here as well?

 

[CurtG]

2012RT-S Bar and Links or just the Bar

I'm seriously considering adding the bar to my 2012RT-S after all the positive threads about but am wonder if I should accumulate the funds for the links also.

Thanks.

Ride safe,

 

[Bob Denman]

In for a penny; in for a pound! :thumbup:
Since you're already improving the front suspension; why not upgrade some of the parts while you're at it? :2thumbs:

 

[CurtG]

Point taken, thanks. Those pounds can be a killer sometimes.

Ride safe,

 

[Bob Denman]

:yikes: Yes they can! :shocked:

 

[BajaRon]

Apologies...

The 2013 RS, RSS, ST, STS, ST Ltd., sway bars will ship today. I am sold out of the Chrome Moly links but I've got more components coming and I should be shipping these again tomorrow.

 

[BajaRon]

All remaining orders for 2013 RS, RSS, ST, STS, ST Ltd., sway bars AND the new Custom, Chrome Moly Heim Joint Links will ship tomorrow. You should already have received an email from me with the Link Install Instructions attached and another email from Stamps.com / USPS that a package is being shipped to you. These may go to the address attached to your Paypal account (if it is different than your usual email address).

Again, very sorry for the late ship date on these items. I think I may actually be caught up!

Let me know if you have an outstanding order and have not received these emails.

 

[BajaRon]

I had some issues with my email service and I am not sure I have taken care of everyone. If you ordered a Sway Bar or Chrome Moly Link Set, and have not heard from me, please email me at [email protected] so we can get it worked out.

I think I have everything taken care of but under the circumstances, I can't be sure of it.

 

[BajaRon]

I know I said I would notify everyone when I had the Chrome Moly Link Kits back in stock. The problem has been that I sell nearly all of them before I can get another batch made. I am making these 25 sets at a time. It takes me awhile to to this. I should have another 25 sets made by the end of this next week.

I need some elves!

 

[Bob Denman]

Good stuff takes time; cheap can be found anywhere! :thumbup:

 

[Magdave]

I know I said I would notify everyone when I had the Chrome Moly Link Kits back in stock. The problem has been that I sell nearly all of them before I can get another batch made. I am making these 25 sets at a time. It takes me awhile to to this. I should have another 25 sets made by the end of this next week.

I need some elves!

They are worth the wait PJ at Velocity Power Sports was impressed by them :thumbup:

 

[reverendg]

AWRIGHT!!!

Despite a comedy of errors, I now have what feels like a different trike. Silver grey 2012 RT-S with 1500 miles on it. First my email ended it up in cyber-limbo, then a 2013 bar was shipped by mistake, but with the new links. After emailing Ron the right bar was in my mailbox the second day later. Sunday was a good day for the install, and the critter gitter as well. I opened the frunk and put a rolled up towel under the lip to keep it open (easier for flexing the frunk I figured), then dropped the little skid plate and removed the two 10 mm bolts holding the lower frunk to the frame right near the sway bar bushings. Nice easy install. Oh, I did remove the lower A-arm plastic covers for easier access to the upper link bolts. The difference is amazing. We will get the wife's assessment on Wednesday, we are taking a short trek up the road to go to a concert. Now if only the other things I am waiting for would arrive...........but that is a whole different story. This one got a happy ending....Yay!!!

 

[BajaRon]

The Custom Chrome Moly Steel Heim Joint Links are back in stock right now. Don't know how long they will last but as of right now I've got 17 sets ready to go that are not spoken for. These are $65.00 delivered to the 48 US States and Puerto Rico. I'll ship anywhere in the world. Shipping costs vary depending on location outside the US.

You can email me at [email protected] or PM me here at Spyderlovers.

 

[Atonic]

Will a 2013 RS-S benefit from the sway bar upgrade?

 

[Magdave]

Will a 2013 RS-S benefit from the sway bar upgrade?

Seriously do a search. Anyone who has used his sway bars has nothing bad to say.:thumbup:

 

[Bob Denman]

:agree: :2thumbs:
Although you may also have some new options available right from BRP...