Any videos on installing Garmin 660 Dash mount?

[recordingguy]

Does anyone have a link to the video that Lamont made when he installed a Garmin 660 on the dash using the voltmeter hole as an access? Thanks Bob

 

[Highwayman2013]

Maybe here:http://lamonstergarage.com/tech-videos-2/x-grip-mount.html

 

[recordingguy]

Maybe here:http://lamonstergarage.com/tech-videos-2/x-grip-mount.html

This is something new for your phone. I see he mounted his Garmin 665 0n the top of his dash on this RT. The RT he had before this one, he installed the Garmin in the place of the Voltmeter. He removed the meter and installed a mount through the dash. Maybe someone has information on what they did for the newer mount on top of the dash also. Thanks again. Bob

 

[Highwayman2013]

JT has a mount for the top of the dash.http://gnipsel.com/spyderstore/index.php?route=product/product&product_id=50

 

[finless]

This is something new for your phone. I see he mounted his Garmin 665 0n the top of his dash on this Rt. The RT he had before this one, he installed the Garmin in the place of the Volt meter. He removed the meter and installed a mount through the dash. Maybe some one has information on what they did for the newer mount on top of the dash also. Thanks again. Bob

I don't recall Lamont doing that. Maybe your thinking of my video doing that?

http://www.spyderlovers.com/forums/...IY-GPS-mount-and-hookup-with-12V-outlet-video

Bob

 

[recordingguy]

Bob thank you for getting back to my thread. You were right about your video. For some reason I thought of Lamont as the one that come up with the install video. Sorry about that. Have a question for you. I have the Garmin 665 and have the BRP install on the handle bar center. Can I use the wiring harness that is from Garmin when I move the GPS to the gage port like you did. I plan on using the Gas gage port on the right. Seems to me that the wires would have a shorter distance to be rerouted. May be you can give me some insight on this. Bob PS Bob a replied back on your old post by mistake so my question is also their. Sorry

 

[finless]

Bob thank you for getting back to my thread. You were right about your video. For some reason I thought of Lamont as the one that come up with the install video. Sorry about that. Have a question for you. I have the Garmin 665 and have the BRP install on the handle bar center. Can I use the wiring harness that is from Garmin when I move the GPS to the gage port like you did. I plan on using the Gas gage port on the right. Seems to me that the wires would have a shorter distance to be rerouted. May be you can give me some insight on this. Bob PS Bob a replied back on your old post by mistake so my question is also their. Sorry

Since it's my video your talking about, lets keep the convo on my post in the DIY section.

Bob