The wife has been spending her Christmas money on Spyder parts and accessories, one of the first parts to arrive was the Can-Am Auxiliary light which goes on the front spoiler.
Pretty easy install.
1. Undo 2 Torx screws
2. remove the honeycomb panel
3. Unplug the cable from the panel
4. Connect Cable to light
5. Use the 4 Phillip head screws to fasten light in place.
This light comes on when the Spyder is on and the engine is on just like the headlight.
The light doesn't put out a ton of light in your path, but it does illuminate around the front of the Spyder which helps with traffic seeing you and also when riding in unfamiliar areas. You can see if there are dips and curbs easier.






Pretty easy install.
1. Undo 2 Torx screws
2. remove the honeycomb panel
3. Unplug the cable from the panel
4. Connect Cable to light
5. Use the 4 Phillip head screws to fasten light in place.
This light comes on when the Spyder is on and the engine is on just like the headlight.
The light doesn't put out a ton of light in your path, but it does illuminate around the front of the Spyder which helps with traffic seeing you and also when riding in unfamiliar areas. You can see if there are dips and curbs easier.





