almost done

[aka1004]

pic 1: stereo components
audiocontrol eq/electronic crossover (this one was a must)
eclipse 4 channel digital amp (chosen for it's size and low electricity draw)
polk audio 5 4/1" component speakers (chose polk audio db series mainly because they are marine certified)
polk audio 8" sub
i use iphone as a source

pic 2 and 3: my half ass fiberglass speaker pods i spent 5 days on them and just gave up on smoothing them out properly and just painted them they hold the 5 4/1" and 1" tweeter.

pic 4: brp seat covers (i have no problem with comfort of the stock seat and i do put alot of miles. it just looks cheap)

pic 5: kewlmetal luggage rack

 

[aka1004]

pic 1: leo vince muffler

pic 2: evoluzione race air flow system

pic 3: led brake/running lights

pic 4: marker led on the sides

pic 5: kuryakin grips and throttle boss

 

[ataDude]

Lookin' good!

.

 

[aka1004]

pic 1: hid all around

pic 2: white led front fender lights to match the hid

pic 3: f1 slider windshield

pic 4: auxiliary power bus

pic 5: talon alarm

 

[aka1004]

pic 1: evoluzione anti-sway bar :2thumbs:

pic 2: spyder city 2" riser block

and countless hours...

next thing will be to finish sub woofer box and mounted on luggage rack. my goal was to have enough room in the front trunk for tool set, half helmet and my jacket, so sub in the trunk was out of the question, plus i would loose too much sound with sub in the trunk due to engine noise even if i have it down firing, a rack on top of subwoofer box for my golf club bag, either corbin or brp side saddles and electronic fuel management. hopely that will be IT!!!

 

[bjt]

Looking good.

 

[Bersquack]

Nice Mods!

 

[8LEGS]

:2thumbs:

 

[BumbleBee]

Looking good. What a stereo set-up. Doesn't leave much space in your trunk??!! :2thumbs:

 

[aka1004]

thank you everybody

 

[aka1004]

Looking good. What a stereo set-up. Doesn't leave much space in your trunk??!! :2thumbs:

i have room for my half helmet,tool set, bottle of water and my jacket, which was my goal to have:thumbup:

 

[The Breeze]

pic 1: evoluzione anti-sway bar :2thumbs:

pic 2: spyder city 2" riser block

and countless hours...

next thing will be to finish sub woofer box and mounted on luggage rack. my goal was to have enough room in the front trunk for tool set, half helmet and my jacket, so sub in the trunk was out of the question, plus i would loose too much sound with sub in the trunk due to engine noise even if i have it down firing, a rack on top of subwoofer box for my golf club bag, either corbin or brp side saddles and electronic fuel management. hopely that will be IT!!!

I don't know what kind of clearance you have under your seat- but, an alternative to the box would be to mount transducers under the seat.
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=299-028

 

[Venym]

I like the kuryakin grips. how hard were they to put on?

 

[aka1004]

I don't know what kind of clearance you have under your seat- but, an alternative to the box would be to mount transducers under the seat.
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=299-028

I have forgotten about them things. There is no room under the seat but I could mount couple if them under the plastics addition to the sub. One 8" probably is not going to be enough. Thank you^^

 

[aka1004]

I like the kuryakin grips. how hard were they to put on?

Pretty easy. Stick a flathead screw driver in to loosen the glue and stock grips comes off especially the throttle side since it does not have much glue on it. Just don't use too much glue on throttle side when you install new grip or glue will get inside the sleeve

 

[0228lisa]

I like the kuryakin grips. how hard were they to put on?

They aren't that hard. I didn't do it but watched the process on mine. They make a huge difference to me on comfort. :2thumbs:

 

[0228lisa]

I just bought my F1 slider and haven't ridden with it yet. I was a little dissappointed in the slider hardware. They didn't use rubber washers...I have four metal ones stacked on top of each other and the knobs and metal sliders are huge and in the way. I think they can improve on the hardware to minimize the ugliness of it all. I'll post a pic for the others so they can see for themselves. :sour:

 

[aka1004]

I just bought my F1 slider and haven't ridden with it yet. I was a little dissappointed in the slider hardware. They didn't use rubber washers...I have four metal ones stacked on top of each other and the knobs and metal sliders are huge and in the way. I think they can improve on the hardware to minimize the ugliness of it all. I'll post a pic for the others so they can see for themselves. :sour:

they use metal/rubber washers on 2 that i have. they are metal on top and rubber on bottom. f1 was talking about using black rails for future products :dontknow:

 

[aka1004]

everything are up for sale at half price of retail.
i will be switching to RT even thou they sucked all the sportyness out of it.
sale on race air flow is pending. i am waiting to hear from BRP if RT has same throttle body as GS.

 

[leo76dragon]

everything are up for sale at half price of retail.
i will be switching to RT even thou they sucked all the sportyness out of it.
sale on race air flow is pending. i am waiting to hear from BRP if RT has same throttle body as GS.

sent you a pm.......