• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Adding LED lights for rear lighting/braking - Need help

333Club

333Club

New member
Can anyone offer any advice or tips for installing aftermarket LED lights for rear of ST ? I haven't done any mod's yet to a Can Am so not sure where to start or which panels I have to remove.
Not sure if I can do rear light & brake in one?
Thanks.:helpsmilie:
 
333Club said:
Can anyone offer any advice or tips for installing aftermarket LED lights for rear of ST ? I haven't done any mod's yet to a Can Am so not sure where to start or which panels I have to remove.
Not sure if I can do rear light & brake in one?
Thanks.:helpsmilie:
Click to expand...

Check with TricLED.com on the RS/GS section, RS and ST share the same similar brake lights.
 
Here's what you do..!!

go online to green manuals and get/download one. If you are going to do some of your own work this is the best thing to have. The owners manual has a good deal of information as well. But for wiring diagrams etc you will need a shop manual...good luck..:thumbup:
 
I received them they did not come with the mount necessary to mount them on my 2013 Spyder SE5 ST-S. And I guess Givi doesn't make a mount yet for my specific spyder. Does anyone have any ideas or suggestions on what I could possibly do?
 
Abbysam007 said:
I received them they did not come with the mount necessary to mount them on my 2013 Spyder SE5 ST-S. And I guess Givi doesn't make a mount yet for my specific spyder. Does anyone have any ideas or suggestions on what I could possibly do?
Click to expand...

What exactly is it that you received?

Carl
 
BRAKE LIGHTS

I don't know what you ordered but Custom Dynamics makes a 3rd brake light that is plug and play. They are a site sponsor. They also make LED's for the two brake lights on the ST's and even rear LED turn signals. All are plug and play and very easy to install.
 
You must log in or register to reply here.

Similar threads

M
Rear wheel removal - can't get the brake caliper off or remove axle - help??
Replies
8
Views
2K
pegasus1300
pegasus1300
Davgill2002
2020 & Newer RT - What Lighting Enhancement Options/Add ons?
Replies
8
Views
2K
EdMat
EdMat
R
Any install vids for the Front Fender rear red LED lights?
Replies
2
Views
1K
Flamewinger
Flamewinger
broderp
HowTo: Vent Lights - DIY for Less!!
Replies
3
Views
1K
broderp
broderp
L
Need P/N for black body panel just between rear foot pad & front vent/wing?
Replies
4
Views
522
LBen
L
Back
Top