-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
2022 RT Ltd - after best way to route wiring for XK Glow to Lic Plate?
- Thread starter CBXBob
- Start date
FrogmanDave
Active member
Watch this video https://www.youtube.com/watch?v=4J5wu5dlKEQ&t=220s
When he talks about the 4 screw/push pins, they no longer exist. They are torx screws now. I believe there are 6 of them. Also the bolt in the lower front with the nut on the back side no longer exists. It is one of the 6 torx I mentioned earlier. It is simple enough to figure out. Fitting the saddlebag covers back on is a real bear but it is doable. Just take your time and don't force anything.
When he talks about the 4 screw/push pins, they no longer exist. They are torx screws now. I believe there are 6 of them. Also the bolt in the lower front with the nut on the back side no longer exists. It is one of the 6 torx I mentioned earlier. It is simple enough to figure out. Fitting the saddlebag covers back on is a real bear but it is doable. Just take your time and don't force anything.
Similar threads
