• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

2015 F3S, aux power ports

Dannoinmo

New member
Greetings, relatively new Spyder owner here, underneath and on either side ignition bezel are two sets of wires with some type of connector. These are now just plugged into caps which appear on entire bezel. I'm assuming they are 12V DC aux power. If so, who has the best after-market set up for use with iPhone chargers? Any help is greatly appreciated, Thank you in advance.
 
The plug on the left is for the heated handgrip switch and the right side is for the Fog/Auxiliary Light switch. I don't recall the circuitry offhand, but there is likely +12 VDC but not sure on the ground. There is a Customer circuit, fused at 5 amps, with connection points under the passenger seat, under the left inspection cover, and behind the trunk tub in the front end.

Wayne
 
Last edited:
The plug on the left is for the heated handgrip switch and the right side is for the Fog/Auxiliary Light switch. I don't recall the circuitry offhand, but there is likely +12 VDC but not sure on the ground. There is a Customer circuit, fused at 5 amps, with connection points under the passenger seat, under the left inspection cover, and behind the trunk tub in the front end.

Wayne
Thank you very much, that clears it for me . .
 
Back
Top