• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

2013 SRS Headlight Switch Stuck

Haze

Well-known member
Can the headlight switch on the left handle bar of the 2013 STS be disassembled?

My switch is very difficult to switch from Hi to Low beam.
I'm hoping to be able to open the housing and replace the switch but can't find any R/R instructions.
Any one have experience with this switch or the housing??
Thanks, David C.
 
Well....

Have not done a sypder and there may not be instructions cause they only sell the whole command, but I have taken many a command apart and repaired them through the years. Can be done needs a good amount of patience and a good memory of whats what and where it goes....:thumbup:
 
It is not a replaceable item. Whole assembly has to changed out to replace the switch. So you could take it apart and tell us what you find. If you do take lots of pictures. My guess after seeing some of the other switches. There are no open contacts in that assembly, all weather sealed. It would not cause any harm to shoot some lube in there and see if that helps. Mine is a little stiff also and would like to know how you make out.
 
Switch

Thanks guys for the response.
I will try some lube first. Final action will be to tear into the module if needed.
Wish me luck. I'll post pictures...
 
Back
Top