LeClaireRog
New member
Does anyone have any experience with code P0480? I know it's a ground fault issue with a fan. Any help in getting me started with a resolution is appreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
2010 Can Am Spyder RTS SM5 Code P0480
- Thread starter LeClaireRog
- Start date
spyderbirds
New member
There is a fuse F4 in the front fuse box, this supplies power to the relay R4 also in the same box in the cooling fan circuit.
Try those as a starting point.
Try those as a starting point.
Bob Denman
New member
:agree:
http://www.spyderhelp.com/Menu Panels/StartMobile.aspx
FAULT CODE: P0480
MODULE: ECM (Engine Control Module)
DESCRIPTION: Radiator cooling fan relay
POSSIBLE CAUSE: Blown fuse Damaged or disconnected headlamp over run switch relay wires ECM
SERVICE ACTION: Check fuse.Disconnect relay.Measure resistance from harness connector: ECMB-J4 to FB-C8 (expected value: < 2 ohms) .
http://www.spyderhelp.com/Menu Panels/StartMobile.aspx
FAULT CODE: P0480
MODULE: ECM (Engine Control Module)
DESCRIPTION: Radiator cooling fan relay
POSSIBLE CAUSE: Blown fuse Damaged or disconnected headlamp over run switch relay wires ECM
SERVICE ACTION: Check fuse.Disconnect relay.Measure resistance from harness connector: ECMB-J4 to FB-C8 (expected value: < 2 ohms) .
LeClaireRog
New member
Thank you.
Similar threads
