12V outlet on F3T

[PrairieSpyder]

One thing I had on my RTS that would be handy on my F3T is a 12V outlet. Later this year, I expect to be camping where electricity won't be available. I used to carry an inverter that I could use to plug in my electric kettle to make coffee.

Has anyone added such a thing to their F3? If so, how'd you do it?

 

[Tango]

I need to figure this out also. :thumbup: Tom :spyder:

 

[spyderCodes]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Ch...qid=1466124531&sr=1-80&keywords=12Volt+socket

 

[Tango]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Ch...qid=1466124531&sr=1-80&keywords=12Volt+socket

Is this under the seat somewhere? They used the one in the left panel for the usb. :thumbup: Tom :spyder:

 

[spyderCodes]

yes, under the seat.

 

[jsw469]

Lamonster Power Plate

http://www.lamonstergarage.com/lamonster-f3-power-plate/

 

[PrairieSpyder]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Ch...qid=1466124531&sr=1-80&keywords=12Volt+socket

Thanks, Rog. :bowdown: