09 Roadster - OEM Fog lights

[CANUSASwede]

brand-new to the spyder and absolutely loving it! came from a piaggio mp3 500... wanting LEDs all around. while there are headlights in the headlight bays, there are (currently) none in the fog bays. what do I need please and thank you!

 

[BLUEKNIGHT911]

GS - FOG LIGHTS

brand-new to the spyder and absolutely loving it! came from a piaggio mp3 500... wanting LEDs all around. while there are headlights in the headlight bays, there are (currently) none in the fog bays. what do I need please and thank you!

:congrats:...& ..:welcome: ..... I'm not sure BRP ever made Fog lights for 09 GS body panels ..... But if they did check a parts fiche ( cheapcycle.com ) ..... or you could DIY a pair of small ( but powerful after-market LED's ) into the holes .......or you do what I did, and use the scoop as an intake for the AIR BOX, so the throttle bodies get much COOLER Air ...... Mike :thumbup:

 

[aka1004]

eBay!
Something like this or brand new unopened item can be had for $350-ish time to time.
You can replace the bulbs with LED or hid.
2-4 hours of labor or $2-300 for installation.
If you are planning to do bajaron’s anti-sway bar, it would be a good idea to do them at the same time to save on time to take down the frunk. Although not necessary for anti-sway bar, it’s just easier with frunk off and you do need to pull frunk off for fog lights.

https://m.ebay.com/itm/CAN-AM-SPYDE...435731&hash=item3fa88d97fc:g:sDIAAOSwx0ZbdYx9

 

[CANUSASwede]

:congrats:...& ..:welcome: ..... I'm not sure BRP ever made Fog lights for 09 GS body panels ..... But if they did check a parts fiche ( cheapcycle.com ) ..... or you could DIY a pair of small ( but powerful after-market LED's ) into the holes .......or you

do what I did, and use the scoop as an intake for the AIR BOX, so the throttle bodies get much COOLER Air ...... Mike :thumbup:

elaborate please :bowdown:

 

[BLUEKNIGHT911]

COLD AIR INTAKE

:congrats:...& ..:welcome: ..... I'm not sure BRP ever made Fog lights for 09 GS body panels ..... But if they did check a parts fiche ( cheapcycle.com ) ..... or you could DIY a pair of small ( but powerful after-market LED's ) into the holes .......or you

elaborate please :bowdown:

Go to my Albums ( Bio page ) .... pics with words are in the album " cold air - for air box on GS & RS " if you click on a pic it will have an explanation at the bottom ...... not hard to do ...... Mike :thumbup:

 

[Culpjp]

:congrats:...& ..:welcome: ..... I'm not sure BRP ever made Fog lights for 09 GS body panels .....:

They did make fog lights. That is what they used in Europe for low beams. I don't know how easy it will be to find them, now that they stopped making the RS model.
It's getting hard to find the BRP HID headlight kit's for the RS's.

 

[Chupaca]

Little checking.....

I got the panels and the light frames from cheapcycleparts.com.They also have the light but for the European models. I got them to install turbo fans and ducts to the Airbox and rear cylinder at the throttle body...they had kit and you might find them .:thumbup:

 

[CANUSASwede]

they had kit and you might find them .:thumbup:
View attachment 164864

that kit have a part # to associate with? kinda really kewl looking mod

 

[Chupaca]

Sorry....

that kit have a part # to associate with? kinda really kewl looking mod

little late getting back but no you just have to order the parts indivisually. Cheapcycleparts.com has the breakdown and to the side you will see the euopean parts. :thumbup: the fans and tubes are from ebay or auto parts. You can see some of the inside on my albums in my profile....