• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

08 RS Vibration

chillicpl

New member
I've developed a vibration it's at it's worst from 5k to5500 in the pegs and hand grips. In 20 min of riding my right hand is numb. we can replicate it in any gear. We've checked tires, bearings, tire pressure, exhaust gasket, mounts, and the belt is running true. There's only 10k on the bike IMHO this is way too early for internal engine problems.

Does anyone have any ideas?

thanks and ride safe
Bruce
 
I've developed a vibration it's at it's worst from 5k to5500 in the pegs and hand grips. In 20 min of riding my right hand is numb. we can replicate it in any gear. We've checked tires, bearings, tire pressure, exhaust gasket, mounts, and the belt is running true. There's only 10k on the bike IMHO this is way too early for internal engine problems.

Does anyone have any ideas?

thanks and ride safe
Bruce

One of our sponsors (Smooth Spyder) has a product that helps with this...I am going to get it sooner or later...he sent me pics but not the actual directions...the pics don't look too bad but I have to see if I need a lending hand with the installation...that's why written directions are a must for simple folk like meself...I know that everyone who has one really loves it...this might be one of those 'have to have' products...

Maybe Jim will chime in here...
 
Check your front sprocket for spline wear and looseness. Was it retensioned and retorqued at 6K, as specified in the service bulletin? Also check rear wheel/sprocket bearings. Give the belt teeth a good inspection, too. Vibration in a certain rpm range is not uncommon, but sudden development of a vibration is an indicator of problems. If you can't figure it out, see your dealer.
 
Back
Top