• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. JS3535

    Fuel type---

    How much have you spent on your Spyder? $20k +? And all the money you have put in accessories and you are worried about saving 50 cents?!?!?
  2. JS3535

    Sunoco Optima Fuel

    I have stage 1 flash so 91 or higher is recommended. Also, the 1330 has a 12:1 compression ratio which is pretty high and would run better on higher octane fuel to prevent knocking. Since I don’t know the exact parameters of the ECU and where the timing is set I prefer to run the highest I can...
  3. JS3535

    Centramatic Balancers on F3

    I agree! I had them on all 3 for awhile with kendas. Then replaced fronts with Fomozas and properly balanced, reinstalled without balancers & it’s smooth with no shakes or vibes whatsoever. A good alignment from Squared Away also helps. Ended up selling the complete set for $100. Will never...
  4. JS3535

    OK here is another one WHAT IS IT ?

    Patriot MOTOCOMP
  5. JS3535

    Sunoco Optima Fuel

    Just wondering if anyone has used this fuel in their Spyder? It’s a 95 octane ethanol free fuel made for small engines or storage vehicles. I don’t usually worry about fresh fuel because I’m always riding however my Spyder is probably going to be parked for awhile so I thought about getting...
  6. JS3535

    Laam Seats

    That’s nice. I need to go up there or get mine ordered.
  7. JS3535

    My new exhaust, tell me your thoughts.

    I call it a F3S-T. It’s only 2 of a kind that I know of. Jacob at Lamonster did it to his too. Just added the top part of the dash & cowling to the F3S. The stock muffler does sound better, but I wanted to try this out (and waste more money) seeing how I would like it. I do have my stock...
  8. JS3535

    RT muffler on F3S

    I know this is a old thread but I finally did it.
  9. JS3535

    My new exhaust, tell me your thoughts.

    Not meaning to highjack your thread, but what do you think of my new exhaust?
  10. JS3535

    F3-T windshield with vents

    I know I’m the odd ball but I really like the TallBoy. I’ve tried the F4 and still had buffeting.
  11. JS3535

    Shad bags installed, differently

    https://www.spyderlovers.com/forums/showthread.php?114781-1up-Top-Case-Only&highlight=1up+top+case
  12. JS3535

    1330cc Bag to strap on passenger seat

    https://www.spyderlovers.com/forums/showthread.php?127258-Nelson-Rigg-Tail-Bag-CL-1040-TP
  13. JS3535

    Installing Baja Ron Sway Bar

    Where are you located in CA? If you are willing to ride to me, I will install it for you. If you want to do it yourself & safely, dig a little trench and roll the bike over it. It’s a lot easier and safer vs lifting it 2 feet in the air.
  14. JS3535

    convert F3-S to F3-T?

    Yes. Wasn’t really that hard just time consuming & $2500.
  15. JS3535

    convert F3-S to F3-T?

    :2thumbs:
  16. JS3535

    convert F3-S to F3-T?

    That’s the way to go grumpy!
  17. JS3535

    convert F3-S to F3-T?

    ABQ is correct, you would need to change the swing arm. I personally like the Shad bags better than the T or L. They have more room, plus it’s a lot less Tupperware on the rear end & cleaner looking. Adding the front console upper half to become a T or L isn’t that hard or expensive if you...
  18. JS3535

    1up Top Case Only

    I’ll sell you mine for $25,000 and I’ll throw in the rest of the bike for free. All seriousness though, I’m surprised I got mine when I did because it was only for the Police model and there is not many of those out there. Took about 1 week to get when I ordered mine. Should be pretty easy...
  19. JS3535

    Rear peg removal, one bolt stuck to the brass fitting which spins - HELP please

    I had the same problem when removing mine. Get an easy out & pound it in the opposite side to hold it while trying to loosen the other side. Heat the hell out of it first. You are or already have ruined the brass piece but those are cheap to replace.
  20. JS3535

    Debadging an F3

    Yes, why would you? Oh, I did. Because it looks a lot cleaner. The stickers come off easy the Can-am lettering is glued on pretty good. Use a heat gun and warm it up & it peels right off. It might leave some glue on there that can be cleaned up with some goo gone.
Back
Top