• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by hsteil

  1. H

    Idler Wheel Kit / Belt Tensioner Accessory for F3

    Hi Bob its kmh, or, as you call it, 'the un-real one'. But I do regularly cruise, with the Madstad-screen up, with around 155plus/minus kmh on clean stretches of Autobahn. We do have over 80 million people in a country barely larger than north Dakota, and still one can can find empty roads and...
  2. H

    Idler Wheel Kit / Belt Tensioner Accessory for F3

    idler kit Hi Steve, I posted this question in the past and again yesterday: Will this idler kit help with the awefull howl my belt makes around 65 and around 130??? ( I ride in Germany, where the speeds are somewhat higher..) At my dealer we did various attempts with the tightness of the...
  3. H

    F3 Idler Pulley Kit (Part #219800412) Installed!

    idler F3S,2016 regards,Peter
  4. H

    F3 Idler Pulley Kit (Part #219800412) Installed!

    idler kit Hi, I would be immensly grateful if someone could help me with this idler-relevant question: I have no problems per se with any vibration, but that aweful howling noise from the belt drives me nuts. It alway appears around 65 kmh, and again at about 125kmh.No, it is not rpm...
  5. H

    good morning Spy-merica,need help

    thank you THANKS FOR TAKING THE TIME TO WRITE. SHORTLY AFTER POSTING, BECAUSE THE INFO NEEDED WAS TIME SENSITIVE (I KNOW, SOME ARE ALWAYS IN A HURRY) I CALLED LAMONSTER GARAGE VIA SKYPE, AND THANK YOU SO MUCH, GOT THE ANSWER. FOR FUTURE REFERENCE, THERE IS A 8. SOMETHING MM AND AN 11MM ANGLED...
  6. H

    What's this Clacking/clicking noise from the F3's rear end?

    fuel cap got the same problem on my F3 with the fuel cap... 2015, 7k kilometers/5k miles Peter on 'Nitecrawler' in Germany
  7. H

    good morning Spy-merica,need help

    one of my friends on the german site is trying to find out the hole diameter in the rim through which the inflation valve goes. he is trying to mount an angled valve with the next tire change, but there are various dimameters available. if someone has this info, please post, inch or metric, does...
  8. H

    F3 mods: thanks spyderjim, guzzy, BeRight !

    The wingrack II was originally made for a few specific bikes, thats why the holes dont fit. But nobody forces you to put a topcase on it, however, the mounting plate comes with it, so does a set of signallights. you can figure it out, aint hard..
  9. H

    WANTED TO WAIT UNTIL COMPLETION BUT....

    as a German... I can shed some light on this question ( simply because I am to far away to be worried about any repercussions...I think, and dont quote me on this, it stems from the word "sparkling" with the first two letter replaced by another consonant, it being originally two words. But I...
  10. H

    F3 mods: thanks spyderjim, guzzy, BeRight !

    because... because I am stupid , thats why !!!
  11. H

    F3 mods: thanks spyderjim, guzzy, BeRight !

    Guzzi installation F3 First, I Was given the 'roadmap' to the basics by Steve (BeRight) punched in 'Wingrack" in the box in the top toolbar, right side, and, voila...whether there is a specific instruction I can not tell you. I used the Wingrack II N140 ( same as the other fellows I believe...
  12. H

    F3 mods: thanks spyderjim, guzzy, BeRight !

    .Just wanted to show y'all my new kitchen living room and bedroom, which are now in the aft quarters of the F3. Bathroom remains in the Bow. Open lid , one leg over, have a seat. You get the idea......I was only allowed to post 5 pictures, but since the basic set-up is identical, i.e. use of the...
  13. H

    F3S Sport Touring Model

    thank you ok, would the existing signal lights interfere with the wing rack? Thanks in advance, Peter
  14. H

    F3S Sport Touring Model

    BeRight... still like your setup the best. You kept the lines of the bike and it looks elegant IMHO. so you use the Givi keyless I guess, but which racks did you use, plus is your SIDEcase rack connected with your TOPcase rack? If you could give me some guidance I would appreciate it. And thanks...
  15. H

    F3S Sport Touring Model

    Hi, ABQ could you kindly tell me whether you used the wingrack 1 or 2 ? or, asked another way, does your wingrack have the integrated signal lights? thanks in advance, Peter
See more
Back
Top