• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Cambello

  1. Cambello

    clock install

    constant power I the clock only works when you turn the ignition on. I have a button lowerdown near the speaker that when pressed sets the time. I didn't want the clock to be permanently powered because a lot of the time it's not being used, but thats not to say you couldn't wire it up to...
  2. Cambello

    clock install

    Clock Hi, yeah I got the clock from Ebay it wasn't expensive , just search eabay for a 52mm analogue clock and it should come up in your search box, :-) I went with a replacement clock on my fuel gauge because it was easier to do this rather than cutting into existing circuits or oil lines...
  3. Cambello

    clock install

    Dashing set up So I've now fitted both replacement gauges, wanted to keep it simple with no mess. Installation took about 1 hour. First pic is with the ignition key in the on position and the voltage showing is the output from the battery. Just one word of warning, when your looking for a...
  4. Cambello

    clock install

    Cables Cool but just so I get this right, the cable with the female spade connector (I take it) is the + 12v switch that is connected to the relay that brings the lights on. The centre cable of the 3 is the - or ground cable, and so I always thought the outer 2 cables of the 3 were the...
  5. Cambello

    clock install

    Digital gauge Thanks Bob, I bought this this gauge as well, after seeing your clip. But I also bought an analogue one aswell just in case I didnt like it. I noticed that the instrument on the other side of your dash had a black surround which makes the two of them blend in as a pair. They look...
  6. Cambello

    clock install

    Connections How are those connections working out for you? I didn't connect mine up like that. I used the centre cable out of the block of 3 but then I used the loose red cable to give me the 12 volts. You seem to be using the signal cable going to the instrument. When I tested it the centre...
  7. Cambello

    clock install

    clocks Well I'm waiting for this volt meter to turn up, but if it's like the clock it should be a piece of cake. they fit in quite easy no issues at all. this is the Clock I fitted, very simple installation and the button on the right only takes seconds to adjust to the correct time once...
  8. Cambello

    clock install

    Clock Yep, just fitted an analogue clock this weekend buy using the +/- to the light on the gauge. The clock came with a button so that you can quickly set the time once the power is switched back on. I didn't want anything running when the bike is sitting idle. Used a volt meter to identify...
  9. Cambello

    "Parking Brake Failure" Orange Screen

    Cable tension I recently had this problem but it turned out to be a broken parking brake spring.:hun: anyway after buying a new spring I took the tensioner off the back (that's the half circle pulley) and fitted the new part. It was then I realised how the whole thing worked. The spring keeps...
  10. Cambello

    Rear brake spring broke

    Cheers Boooooooom! thanks guys, thats great advise, found it straight away :yes::thumbup::clap:
  11. Cambello

    Rear brake spring broke

    Hi Guys, looks like my rear spring on my parking brake has broke on my 2010 RTs. I'm reading that this was a recall item , Is this true? if not can any one give me a parts number or a web site of a dealer that ships to the UK, please, many thanks.
  12. Cambello

    Thought I'd post this little problem

    tapped So now im just tapping the hole with an 8mm tap And now this bolt is tight. Job done.
  13. Cambello

    Thought I'd post this little problem

    Tapping Yeah rule of thumb is the thickness needs to be the diameter of the bolt when tapping into metal and at first glance this looks to be good to go. Can am have increased the thicknes of the frame at this point so all is well. So many people have problems with this area and all because...
  14. Cambello

    Thought I'd post this little problem

    So I was driving along the other day and decided to pull in to a road side bikers cafe. Tried to start my RT up and no power. After tugging and pulling found the fault to be the ground post under the seat (RT-s 2010) was loose. Anyway after being told that you should never ever touch this this...
  15. Cambello

    Has anyone done this mod????

    Loss of power This might not be what your looking for but this weekend I had the same issue. Battery dead after driving it 20 miles. Well thats what I thought it was, it now turns out to be the terminal post under the seat next to the fuses was just a tad bit loose,
See more
Back
Top