• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

What's the secret?

ShadyGrady

New member
I have tried every trick I can think of to get the 2 little triangular covers right above the frunk back on and seated - all in vain. I can get the post to seat but I can not get the rear section to seat back in the slot. This should be about as simple as it gets.What am I missing?
Thanks,
ShadyGrady
 
Two hands. Or one hand and a finger actually. The finger goes under the slot pushing up while you push down on the triangular cover. Usually takes me a couple of tries before it snaps in.

Trb--
 
Don't over think it, sometimes it just wants to be a pain in the neck, be sure you are putting the right side on and remember it is a little flexible.

Cruzr joe
 
Two hands. Or one hand and a finger actually. The finger goes under the slot pushing up while you push down on the triangular cover. Usually takes me a couple of tries before it snaps in.

Trb--

:agree: Push down with your hand and pull up with your finger.
 
THANKS GUYS

Thanks guys - you hit it right on! Using up-pressure with a finger under the slot while pushing the panel down from the top works every time. I did not take into account how flexible the panel containing the slot is.
ShadyGrady
 
Back
Top