Speaker Mounted ACC Plug

[Dragonfly]

Need some help / advice on mounting the BRP Accessory Plug in the Speaker Grill, If I mount the pug over the speaker it will almost touch the speaker however if I move it further out it is to long and will not fit. How did you mount the ACC Plug? picture would help.

 

[finless]

This is how I did it in the speaker grill.

http://www.spyderlovers.com/forums/...IY-GPS-mount-and-hookup-with-12V-outlet-video

Bob

 

[Dragonfly]

Thanks finless,
I have the grill off but it looks like the plug will sit right on the speaker. A little over to the left of the left side speaker is a hollow area that I have no idea in what is behind it that I thought about drilling out a 2" plug. Parts manual is not clear on description. Most likely will go with the flow. Thanks.

 

[Dragonfly]

Thanks for the tip finless, perfect fit as you suggested however I used a keyhole saw was just the right size only problem I did not expect that plastic to melt so quickly. :yikes:

 

[finless]

Yes even with a dremel and a barrel sander on it, it melted quite easily if your not careful.

Bob

 

[Ben Burped]

Another option

My power out is mounted in a blank where a gauge could be installed. It is handy there to power my radar detector and looks like it came there. It's powered by the gauge power supply directly behind it with quick disconnects. Consider it.

 

[Dragonfly]

My power out is mounted in a blank where a gauge could be installed. It is handy there to power my radar detector and looks like it came there. It's powered by the gauge power supply directly behind it with quick disconnects. Consider it.

Thanks but got it mounted in the Speaker Grill, need to save the gas gauge location for an upgrade to digital multi display gauge. (soon I hope)

 

[ursamajor35126]

View attachment 98433

What is the other gauge showing the "P"? :dontknow: Thanks.

 

[edmarino]

It's to late now but a 12 volt Powerlet outlet is smaller then standard 12 volt outlet. They also sell cables for connecting GPS other devises etc. Only requires A 5/8 dia. hole and about half the length.

 

[finless]

Thanks but got it mounted in the Speaker Grill, need to save the gas gauge location for an upgrade to digital multi display gauge. (soon I hope)

View attachment 98433

Looks like mine :clap:

Nice job!

What is the gauge for?

Bob

 

[Dragonfly]

Looks like mine :clap:

Nice job!

What is the gauge for?

Bob

The little square thingy is the Display for my 4 channel RGB 1 Million Color Controller for the Halo lights