trailer Hitch

[Rutherford spyder]

Just bought 2014 Rt Limited traded vin 2011 limited Is there any difference in putting on trailer hitch from 2011 to 2014? Iput trailer hitch on 2011 no problem, salesman told me the rear tire must come off to install hitch! I think he is crazy , does anyone ever heard of that?:banghead:

 

[bill51]

Just bought 2014 Rt Limited traded vin 2011 limited Is there any difference in putting on trailer hitch from 2011 to 2014? Iput trailer hitch on 2011 no problem, salesman told me the rear tire must come off to install hitch! I think he is crazy , does anyone ever heard of that?:banghead:

no went from a 2012 to a 2014 no problem. the wheel stay on.

 

[Rutherford spyder]

Thanks

no went from a 2012 to a 2014 no problem. the wheel stay on.

All I did when I installed it on my 2011 was put bracket on hitch put rod through axel tighten and put cotter pin in hoping same for 2014

 

[bill51]

All I did when I installed it on my 2011 was put bracket on hitch put rod through axel tighten and put cotter pin in hoping same for 2014

:agree: :thumbup: that's what I did.

 

[KnightRider68]

Wiring module

I have a 2014 RT SE6. I want to put a hitch on the vehicle but have no idea as to how to do the wiring. the hitch itself seems pretty straight forward but the wiring is another story. Is there a video that you know of that would explain it?/ I appreciate any help I can get. Thank you.


KnightRider

 

[pitzerwm]

I have a 2014 RT SE6. I want to put a hitch on the vehicle but have no idea as to how to do the wiring. the hitch itself seems pretty straight forward but the wiring is another story. Is there a video that you know of that would explain it?/ I appreciate any help I can get. Thank you.


KnightRider

Doesn't a harness and instructions come with the hitch.

 

[Roadster Renovations]

Doesn't a harness and instructions come with the hitch.

When I bought my hitch we decided on an aftermarket trailer. Since the wiring was different, I used the part that plugs in under the seat and then after I had run it I used the color coding that came with the harness to correctly wire the right end on.

Unless splicing into existing wiring, (which I suggest not doing for continuity purposes) your best bet would be to by a harness. Here is one I found on Ebay!

http://www.ebay.com/itm/Isolated-Tr...162-/291142552926?hash=item43c972cd5e&vxp=mtr

 

[billybovine]

The BRP trailer hitch and the one from Big Bike Parts are installed without removing the rear wheel axle. There are other aftermarket types that you do have to remove the axle.

 

[ChicoFowler]

I have a 2014 RTL and regularly remove the hitch. Just remove the cotter pin and bar, slide the hitch forks in, replace bar and cotter pin and your done. 15/20 minutes.